Your rig deserves a home. Catalog your gear and get your own A-number. Free, always.

White mascot in glowing gold headphones floats with mouth open, surrounded by gold sound waves and rings

Audiophile sound terms: how to describe what you hear

Many audiophile sound terms can be checked on a frequency response graph: bass, mids and treble are regions of it, and warm, bright and neutral describe the balance between them. Words for space and detail, such as soundstage and imaging, mostly cannot, so we give the frequency range or graph feature to look for only where one exists.

32 terms Updated

Frequency regions

Reviewers name parts of the range more often than they quote numbers. The boundaries here are approximate and overlap, and no two writers draw them the same way, but each region has a recognizable sound.

Bass
Bass is the low-frequency part of music, roughly 20 to 250 Hz: kick drums, bass guitar, the left hand of a piano and the weight of an orchestra. How much a product delivers, and how tightly, shapes its character more than any other region.
The umbrella word for everything below about 250 Hz; when a review says only “bass”, check the graph to see whether the lift sits in the sub-bass or the mid-bass, since they sound quite different.
Sub-bass
Sub-bass is the lowest audible region, roughly 20 to 60 Hz: the rumble under a film score, an 808 kick or a pipe organ’s longest pipes. It is felt in the chest as much as heard.
A leaky headphone seal loses it first and room resonances can cancel parts of it, so a missing bottom octave can be the fit or the room rather than the product.
Mid-bass
Mid-bass is the part of the bass range from roughly 60 to 250 Hz, above the sub-bass: the punch of a kick drum, the body of a bass guitar and the warmth under voices. Too much sounds boomy or muddy; too little sounds thin.
It sits between sub-bass and the lower mids: punch and slam are its own words, while warmth and mud describe its upper half, where it overlaps the mids.
Mids
The mids, or midrange, are the frequencies from roughly 250 Hz to 4 kHz where voices, guitars, pianos and most of the melody live. Because the ear is most sensitive here, small changes in the mids are easy to hear.
Most of the vocabulary for voices lives here: chesty and muddy at the bottom, nasal or honky near 1 kHz, shouty near 3 kHz, so a complaint about a singer translates into a frequency.
Presence
Presence is the region from roughly 2 to 5 kHz, where the upper mids meet the lower treble. It carries the attack of notes and the clarity of voices: enough sounds close and clear, too little distant, too much shouty or harsh.
On a raw headphone graph this region carries a large rise from the ear’s own resonance; judge it against the target line, where a shortfall reads as distant and an excess as forward.
Treble
Treble is the high-frequency region above about 4 kHz: cymbals, the edge of a voice, string overtones and the sense of "air" in a recording. Too little sounds dull; too much sounds harsh or sibilant.
It splits into named zones: presence at its lower edge, the sibilance band from about 5 to 10 kHz and air above, so “too much treble” means little until you know which.
Sibilance
Sibilance is an exaggerated, hissy edge on "s", "sh" and "t" sounds in a voice. It comes from a treble peak somewhere between about 5 and 10 kHz, on the product or in the recording.
If every voice hisses, look for a narrow peak on the graph, which a narrow equalizer cut can fix; if only some recordings do, the peak is probably in them.
Air
Air is the sense of openness and space at the very top of the treble, above about 10 kHz: the shimmer around cymbals, the breath in a voice, the feeling that there is room above the music. Products with little energy there sound closed-in.
Little music has fundamentals this high, so air is overtones and room sound; on a graph it is the far right edge, past 10 kHz, where many headphones begin to fall away.
Frequency regions and how they sound
RegionRough rangeWhat lives thereToo much soundsToo little sounds
Sub-bass20 to 60 HzRumble, 808 kicks, organ pedal notesRumble that swamps the mixFull on most pop and rock; missed on film and electronic music
Mid-bass60 to 250 HzKick drum punch, body of a bass guitarBoomy, muddyThin, lean
Mids250 Hz to 4 kHzVoices, guitars, pianoShouty, nasalDistant, hollow
Presence2 to 5 kHzVocal clarity, the attack of notesShouty, harsh, tiringDistant, veiled
TrebleAbove 4 kHzCymbals, consonants, overtonesHarsh, sibilantDull, dark
Sibilance band5 to 10 kHz“S”, “sh” and “t” soundsHissy, stinging consonantsSoft consonants, rarely a complaint
AirAbove 10 kHzShimmer, breath, room soundBrightClosed-in, polite

Tonal balance

These words describe the shape of the frequency response line, so unlike most sound vocabulary they can be checked on a graph. The targets set what flat should mean for headphones; an equalizer moves one shape toward another.

Tonality
Tonality is the overall balance between bass, mids and treble: whether a product sounds warm, bright, neutral or scooped. It is the first thing most people notice and the main thing a frequency response measurement describes.
When listeners disagree about a product’s tonality, the argument is often about the treble, where ears differ most.
Sound signature
A sound signature is the one-word name for a product’s tuning: neutral, warm, bright, V-shaped or U-shaped. Tonality is the balance you hear; the signature is the label that sorts it into a family, useful for shortlisting, too coarse for a final choice.
The labels below run from neutral outward, and most products are a blend of two, such as warm-neutral or mild V, which is why a graph beats any single word.
Neutral
A neutral product adds as little of its own color as possible, so recordings sound the way they were mixed. In practice it means a frequency response close to an accepted target, with no obvious bass or treble emphasis.
For headphones it only has meaning against a stated target, so “neutral” on two measurement sites can describe curves several decibels apart in the bass.
Diffuse-field
Diffuse-field is a headphone measurement target that describes how a flat sound source would measure at the eardrum if it arrived evenly from every direction. It is a reference for what "neutral" should look like on a headphone measurement rig.
The stricter of the two common definitions of neutral for headphones; graphs plotted against it make a Harman-tuned headphone look bass-heavy.
Harman target
The Harman target is a headphone frequency response curve derived from listener preference research at Harman International, with a moderate bass shelf and slightly less treble than the diffuse-field curve. Many headphones and IEMs are tuned toward it, and many measurement sites compare against it.
Read as a sound signature, it is neutral with a bass shelf below about 200 Hz, which is why some listeners hear it as close to flat and others as mildly warm.
Warm
A warm product has a little extra bass and lower midrange and a little less treble, which makes voices full and the sound relaxed. Too much weight turns it muddy; a larger loss of treble makes it dark. Its opposite is bright.
On a graph, look for a broad lift somewhere between about 100 and 300 Hz with the treble easing off; it is usually meant as praise, unlike its heavier relative, muddy.
Dark
A dark product has less treble than neutral, so cymbals, consonants and the top octave are subdued and the sound feels heavy and closed-in. Dark is a reduction at the top, where warm is an addition lower down; its opposite is bright.
Dark is the mirror image of bright about the neutral line: on a target-compensated graph, a line that falls away to the right through the treble.
Bright
A bright product has more treble energy than neutral, so cymbals, consonants and string overtones stand out. It sounds detailed and lively to some listeners and harsh or fatiguing to others.
Compare bright and neutral products at matched volume: a few decibels of extra treble can pass for extra detail, and the impression often fades once levels are equal.
V-shaped
A V-shaped tuning boosts both the bass and the treble and pulls the midrange back, so the frequency response looks like a V. It sounds exciting and impactful, at the cost of voices sitting behind the drums and cymbals.
The deepest point of the dip is usually in the upper mids; it is the classic shape of a fun tuning, and an equalizer can lift that dip if voices sit too far back.
U-shaped
A U-shaped tuning lifts the bass and treble a little and leaves the midrange only slightly recessed, so it keeps the energy of a V-shape without pushing voices as far back. Many well-regarded consumer tunings are U-shaped.
The same idea as V-shaped with a shallower, wider dip, so voices keep their place; on a graph the middle looks like a broad bowl rather than a notch.
Equalizer
An equalizer, or EQ, raises or lowers the level of chosen frequency ranges to change the tonal balance of what you hear. In hi-fi it is mostly used to correct a headphone or speaker toward a target, or to suit a listener’s taste.
It turns every label in this group into a starting point: a few filters can move a headphone from one signature to another, within what its driver can do cleanly.

Loose reviewer words

These four began as forum slang and are now used as sound descriptions. Each leans toward one of the signatures above, but none has an agreed definition, so the graph is a better guide than the word.

Veiled
Veiled describes a sound that seems to come through a thin curtain: the detail is there but softened, as if the upper midrange and treble were turned down a notch. It is the standard complaint about relaxed or dark tunings.
Closest signature: a mild version of dark, with the upper mids and treble slightly held back; if the graph looks normal, check pads and fit before blaming the tuning.
Analytical
An analytical product presents detail first: every edge, breath and flaw in the recording is laid out plainly. Reviewers use the word for praise when they mean revealing and for criticism when they mean cold; it usually describes a neutral-to-bright tuning with low distortion.
Closest signature: neutral to bright, with lean bass; the same product can be called analytical in one review and accurate in the next.
Musical
Musical is the word reviewers use for gear that makes them enjoy the music rather than notice the equipment. It usually means a slightly warm, forgiving tuning with good dynamics, and it is as much a mood as a description.
Closest signature: warm, though the word also attaches to the low-order distortion of tube gear, which a frequency response graph does not show.
Fun tuning
A fun tuning is a deliberately non-neutral sound, usually with boosted bass and lively treble, chosen to be exciting rather than accurate. It is the reviewer’s polite word for a V-shape that works.
Closest signature: V-shaped, U-shaped or a plain bass boost; fun is the kind word for those shapes when the reviewer enjoyed them.

Space and placement

Words for where sounds seem to be. They depend heavily on the recording and, with speakers, on the room. No standard measurement ranks products on them, so treat every description as one listener’s impression.

Soundstage
Soundstage is the sense of space in a recording: how wide, deep and tall the music seems, and how far outside your head the instruments appear to sit.
The largest of these four qualities and the least agreed on: head shape, the recording and whether a headphone is open or closed all change it, so reports on one model vary widely.
Imaging
Imaging is how precisely a product places each sound within the stereo picture: whether a voice sits in a clear spot between the speakers or smears across them. Good imaging lets you point at where each instrument is.
Imaging is the precision inside the space that soundstage describes; on headphones it depends most on matched drivers, so a well-made IEM can image as sharply as a full-size pair.
Layering
Layering is the sense of depth in a presentation: the impression that some instruments sit in front of others rather than all on one flat plane. It is the front-to-back part of soundstage.
The depth axis of soundstage, carried mostly by reverberation in the recording: distant instruments arrive with more room sound, and products that keep it intact sound deeper.
Separation
Separation is how clearly individual instruments and voices stay distinct when they play at once. Poor separation turns a busy chorus into a wall of sound; good separation lets you follow one part through it.
Separation is telling sounds apart and imaging is locating them; on a graph, too much mid-bass is the usual measurable cause of poor separation, because it masks the mids.

Detail and timing

The qualities reviewers call technicalities. Each has measurable ingredients, such as distortion, ringing and noise, but no single number, which is why they start the longest threads.

Resolution
Resolution is how much fine detail a product lets you hear: the breath before a note, the texture of a bow on a string, the room around a singer. High-resolution gear reveals small sounds without making them louder.
No graph has a resolution line; what you can check is a smooth response and low distortion, then judge the rest on a familiar recording at matched volume.
Timbre
Timbre is the character that makes a violin sound different from a flute playing the same note: the mix of overtones and the way a note starts and ends. A product with accurate timbre makes instruments sound like themselves.
Timbre is judged one instrument at a time and tonality across the whole mix; a narrow peak or dip in the mids or lower treble can spoil one without obviously changing the other.
Transient response
Transient response is how quickly and cleanly a product reproduces the start of a sound: a drum stick on a rim, a plucked string, a consonant. Fast transients sound crisp; slow ones sound soft or smeared.
The start of a note, as decay is its end; on a measurement it shows as an impulse or step response, and a clean one rises quickly without a tail of ringing.
Decay
Decay is how a sound fades after it is struck: the trail of a cymbal, the ring of a piano note, the reverb of a hall. Natural decay sounds spacious; cut short it sounds dry, and added ringing sounds muddy.
With speakers, how long bass notes linger is usually set more by the room’s resonances than by the speakers, which is why placement changes it so much.
Dynamics
Dynamics is how convincingly a product moves between quiet and loud: the snap of a drum hit, the swell of an orchestra, the difference between a whisper and a shout. "Slam" and "punch" describe its low-frequency side.
Dynamics is the contrast you hear and dynamic range the span that can be measured; slam and punch, its low-frequency side, come mostly from the mid-bass, roughly 60 to 150 Hz.

Other topics