Your rig deserves a home. Catalog your gear and get your own A-number. Free, always.

Sound

Equalizer

Also called EQ, equaliser, parametric EQ, graphic EQ

An equalizer, or EQ, raises or lowers the level of chosen frequency ranges to change the tonal balance of what you hear. In hi-fi it is mostly used to correct a headphone or speaker toward a target, or to suit a listener’s taste.

−60+6dB20 Hz1001k10k20kafter EQmeasured dipboostmeasured peakcuttarget
Equalizing to a target: a parametric EQ adds a boost where the measured headphone dips and a cut where it peaks, so the corrected response lands close to the target; small wiggles are left alone. Illustrative curves.

A graphic equalizer has fixed bands, commonly 5, 10 or 31, each a slider at a set frequency. A parametric equalizer lets you choose each filter’s center frequency, its gain and its width, called Q, and adds shelf filters that move everything above or below a chosen point. Parametric is the better tool for correcting headphones, because the peaks and dips in a frequency response rarely land on a graphic equalizer’s fixed frequencies.

Equalizing to a target works by subtraction. Take a measurement of your model, compare it with a target such as the Harman target, and enter filters that cancel the difference: a cut where the headphone has a peak, a boost where it has a dip. Published presets for hundreds of models do this with five to ten filters. Units vary and so do ears, so a preset is a starting point.

Every boost needs headroom. Digital audio cannot exceed full scale, so a 6 dB boost on a track mastered close to 0 dBFS clips. The fix is a negative preamp gain at least as large as the biggest boost, which is why equalizer software has a preamp setting and why corrected playback is a little quieter. Cuts need no allowance, one reason experienced users cut more than they boost.

An equalizer changes level by frequency and nothing else. It will not fix a broken seal, a distorting driver or a small soundstage. It costs nothing, which in some corners of the hobby counts against it.

Common questions

Should you EQ your headphones?

Yes, if something in the sound bothers you and you can name it: thin bass, a sharp treble peak, voices too far back. A few filters fix those for free and can be switched off. If you like the headphone as it is, there is nothing to correct. Start with one or two broad changes of 3 dB or less, compare at matched volume, and keep what still sounds right the next day.

How do you change the headphone EQ on an iPhone?

Open Settings, then the Music app’s settings (under Apps on iOS 18), and choose EQ. The list holds presets such as Bass Booster and Treble Reducer, and they apply to playback in the Music app. iOS has no system-wide adjustable equalizer. Headphone Accommodations, under Accessibility, can tune supported Apple and Beats headphones for your hearing; other apps, Spotify among them, carry their own equalizers.

How do you set up a headphone equalizer on Windows?

Most people use Equalizer APO, a free program that applies parametric filters to everything the computer plays. Install it, choose your headphone output during setup, then enter filters by hand or paste a published preset for your model into its configuration file; the Peace interface adds sliders and a preset menu. Set the preamp to the negative value the preset gives so loud passages do not clip.

What does Q mean on an equalizer?

Q is the width of a filter: the higher the Q, the narrower the band it affects. A Q of about 0.7 spans roughly two octaves and suits broad tonal changes; 1.4 spans about one octave; 4.3 is about a third of an octave, narrow enough to target a single resonance. Wide, gentle filters sound natural. Narrow ones are for specific peaks, and work best as cuts.

Does EQ reduce sound quality?

Not measurably, when done in software with the preamp set correctly. Modern players process audio at 32-bit floating point or higher, so the added error sits far below the noise of any DAC. Problems come from misuse: boosts without preamp reduction clip, and large bass boosts ask a small driver or amplifier for more than it can give. Cheap built-in equalizers on some devices can also add noise or distortion.

Related terms