Tweeter
Also called treble driver, high-frequency driver, HF driver
A tweeter is the small speaker driver that plays the treble, usually everything above a crossover point somewhere around 1.5 to 3 kHz. Most are domes about an inch across; ribbons, air motion transformers and horn-loaded compression drivers are the main alternatives.
A tweeter has to be small and light to follow fast treble and to spread it widely; once a diaphragm is large compared with the wavelength it plays, its output narrows into a beam. The same smallness means it cannot move enough air for bass, and asked to try, it distorts and its voice coil overheats. The crossover keeps those frequencies out.
In a finished speaker, how the tweeter is integrated matters more than its type. Many tweeters sit in a shallow waveguide, a shaped recess that controls their spread to match the woofer around the crossover, and that matching decides much of how a speaker sounds off-axis and in a room.
Most speakers are designed to be heard with the tweeter at about seated ear height. Above or below it, the tweeter and woofer stop arriving together around the crossover and the balance shifts, which is why stands, tilt and toe-in all change the treble you hear.
Common questions
Can a blown tweeter be repaired?
Usually by replacement, not repair. A blown tweeter has a burnt voice coil, and for many models the maker or a parts supplier sells a replacement diaphragm assembly that fits with a few screws; otherwise the whole tweeter is replaced with the same model. A different tweeter changes the speaker’s voicing. Tweeters most often fail from an amplifier driven into clipping, so turn down when the sound turns hard.
What is the difference between a dome tweeter and a ribbon tweeter?
A dome tweeter is a miniature version of a cone driver: a voice coil fixed to a small dome. A ribbon tweeter uses a thin strip of foil, often aluminum, suspended between magnets; the foil carries the current itself and moves as one piece. Ribbons are very light and often spread sound widely sideways but narrowly up and down. They also tend to be more fragile and cost more.
Is a silk dome tweeter better than a metal one?
Neither is better as a class. Silk and other fabric domes damp their own resonances and roll off smoothly. Metal domes such as aluminum, titanium and beryllium are stiffer, move as a rigid piston to higher frequencies, and have a sharp resonance that designers usually place above about 20 kHz. Reputations follow, fabric for smooth and metal for detailed, but well-measuring speakers use both.
Do you need a super tweeter?
For most systems, no. A super tweeter adds output above the main tweeter, reaching well beyond 20 kHz, the upper limit of young hearing. Most dome tweeters already reach 20 kHz, and adult hearing usually stops lower. Some listeners report a more open sound with one fitted; the evidence that anyone hears ultrasonic content is thin and disputed.