Grado GW100 vs Grado HP100 SE

Headphones · both measured by Oratory1990

At a glance

  • Grado GW100 is rated 32 Ω and Grado HP100 SE 38 Ω.
  • Grado GW100 lists a dynamic driver and Grado HP100 SE a dynamic, open air driver.
  • Listed sensitivity is 99.8 dB for Grado GW100 and 117 dB for Grado HP100 SE; the makers' references were not recorded, so the two are not directly comparable.

Frequency response, overlaid

Grado GW100Grado HP100 SEdB relative to 1 kHz
20501002005001k2k5k10k20k-20-100+10+20

Where they differ

  • Grado GW100 has about 5.3 dB more sub-bass than Grado HP100 SE.
  • Grado GW100 has about 6.1 dB more bass than Grado HP100 SE.
  • Grado GW100 has about 2.9 dB more mids than Grado HP100 SE.
  • Grado HP100 SE has about 5.2 dB more upper mids than Grado GW100.
  • Grado HP100 SE has about 3.4 dB more treble than Grado GW100.
  • Grado GW100 has about 2.6 dB more air than Grado HP100 SE.

Measured by Oratory1990; curves normalised at 1 kHz. Small differences at the top of the treble vary with placement and should be read loosely.

Specifications side by side

SpecificationGrado GW100Grado HP100 SE
Impedance32 Ω38 Ω
Sensitivity99.8 dB (reference not recorded)117 dB (reference not recorded)
Driver TypedynamicDynamic, open air
Driver Size44mm52mm
Frequency Response20Hz-20kHz3.5 Hz – 51.5 kHz
Weight170 g—
DesignOpen-back—
WirelessYes—
CableDetachableDetachable
Release year2018—
List price$249—

Specifications are what the makers list; see how audiophila. treats specs, measurements and owner ratings on the methodology page.

Prices

  • Grado GW100

    MSRP: USD 249

  • Grado HP100 SE

    No MSRP recorded

More comparisons