Open-back dynamic headphones from Grado with 52 mm drivers, made to mark founder Joseph Grado's 100th birthday. It was also Grado's first headphone with a detachable cable.
Headphones · Dynamic, open air · 38 Ω · 117 dB/mW
No members own one yet. Own one? Add it to your collection
Driver Size
52mm
Impedance
38Ω
117 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
Cable
Detachable
About
SE stands for Special Edition, and the design pays tribute to Joseph Grado's original Signature HP1 from the early 1990s. Each pair is hand-assembled in Brooklyn, with individually machined aluminium housings in a space grey finish.
The 12-conductor cable plugs into each earcup with a 4-pin mini XLR and ends in a 6.3 mm jack, and both G and F style cushions come in the box. At 38 Ω and 117 dB sensitivity, it is not an unusually difficult load to drive. Amplifier shopping has outlasted plenty of firm resolutions to stop.
Against a common listening target, the upper mids (2–5 kHz) sit 5.7 dB above it and the treble (5–10 kHz) 6.2 dB above. Bass and mids stay within 1 dB of the target, while sub-bass (20–60 Hz) sits 5.6 dB below it. It went on sale in November 2024 at $2,495.
The technical bits
Sound
Specs
38Ω
117 dB/mW
Driver Type
Dynamic, open air
Driver Size
52mm
3.5 Hz – 51.5 kHz
Cable
Detachable
Compare
Where to buy

Grado HP100 SE
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.