Plinth
Also called turntable plinth, turntable base
The plinth is the base of a turntable: the box or frame that holds the platter bearing, the motor and the tonearm. It keeps those three fixed relative to each other and keeps outside vibration away from the record.
Two approaches dominate. An unsuspended plinth relies on mass or stiffness: heavy slabs of MDF, plywood, acrylic or stone, or a deliberately light, rigid frame that stores little energy. A suspended design mounts the platter and tonearm on a sub-chassis that floats on springs inside the plinth, so footsteps and shelf vibration are filtered out before they reach the stylus; the cost is a suspension that has to be adjusted and kept level.
The stylus cannot tell vibration of the plinth from the wiggles of the groove, so whatever the plinth lets through is played along with the music. It arrives from the floor, from the motor and from the speakers. With the deck close to a speaker at high volume, the loop can run away into a low howl, called acoustic feedback. Feet are part of the plinth’s job: many decks have adjustable ones for leveling, and some use soft, isolating ones.
Old wooden plinths crack, warp and lose their veneer, and building a new one is a common restoration project for classic idler-drive decks. Several of those decks were sold as a bare motor unit, with the plinth left to the buyer, which is why no two surviving examples look quite alike.
Common questions
What is the best material for a turntable plinth?
There is no single best one, and makers succeed with both the heavy slab and the light, stiff frame. Among the heavy options, MDF, layered plywood, slate and thick acrylic absorb vibration through mass. Solid hardwood looks good but moves with humidity and can ring. How the plinth is built, and how well it is isolated from the shelf, matters more than the name of the material.
Do turntable isolation feet help?
They can, if vibration is reaching the deck. Footfall on a suspended wooden floor and a shelf shared with speakers are the usual culprits, heard as skips when someone walks past or as boomy, smeared bass at volume. Soft feet or an isolation platform filter some of it. A solid, level surface, ideally a wall shelf above a bouncy floor, fixes more for less. On a deck with a sprung sub-chassis, extra feet add little.
Should you play records with the dust cover up or down?
Follow the manual, because makers disagree: some say close it during play, others say leave it open or take it off. Closed, the cover keeps dust off the record and protects the arm from knocks. Open or closed, a large flat lid can pick up sound from nearby speakers and pass it into the plinth, which may blur the bass or start feedback at high volume. With no advice to follow, try both.