Bang & Olufsen Beoplay H9i vs Neumann NDH20

Headphones · both measured by Oratory1990

At a glance

  • Both list at $499.
  • Bang & Olufsen Beoplay H9i weighs 285 g and Neumann NDH20 390 g.
  • Bang & Olufsen Beoplay H9i is rated 24 Ω and Neumann NDH20 150 Ω.
  • Both are closed-back.
  • Both list a dynamic driver.
  • Bang & Olufsen Beoplay H9i was released in 2018 and Neumann NDH20 in 2019.
  • Listed sensitivity is 95 dB for Bang & Olufsen Beoplay H9i and 114 dB for Neumann NDH20; the makers' references were not recorded, so the two are not directly comparable.

Frequency response, overlaid

Bang & Olufsen Beoplay H9iNeumann NDH20dB relative to 1 kHz
20501002005001k2k5k10k20k-20-100+10+20

Where they differ

  • Bang & Olufsen Beoplay H9i has about 1.8 dB more sub-bass than Neumann NDH20.
  • Neumann NDH20 has about 4.7 dB more bass than Bang & Olufsen Beoplay H9i.
  • Neumann NDH20 has about 1.2 dB more mids than Bang & Olufsen Beoplay H9i.
  • Neumann NDH20 has about 3.2 dB more upper mids than Bang & Olufsen Beoplay H9i.
  • Neumann NDH20 has about 6.1 dB more treble than Bang & Olufsen Beoplay H9i.
  • Bang & Olufsen Beoplay H9i and Neumann NDH20 are about the same in the air.

Measured by Oratory1990; curves normalised at 1 kHz. Small differences at the top of the treble vary with placement and should be read loosely.

Specifications side by side

SpecificationBang & Olufsen Beoplay H9iNeumann NDH20
Impedance24 Ω150 Ω
Sensitivity95 dB (reference not recorded)114 dB (reference not recorded)
Driver Typedynamicdynamic
Driver Size40mm38mm
Frequency Response20Hz-22kHz5Hz-30kHz
Weight285 g390 g
DesignClosed-backClosed-back
WirelessYesNo
CableDetachableDetachable
Release year20182019
List price$499$499

Specifications are what the makers list; see how audiophila. treats specs, measurements and owner ratings on the methodology page.

Prices

We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!

More comparisons