Closed-back studio headphones from Neumann for monitoring and mixing, with 38 mm dynamic drivers, launched in 2019 at $499. They fold for carrying and come with straight and coiled detachable cables.
Headphones · Closed-back · Dynamic · 150 Ω · 114 dB/V
No members own one yet. Own one? Add it to your collection
On sale
7 yrs
since 2019
Impedance
150Ω
114 dB/V
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$499
no live price today
About
The ear cups are aluminium and the pads are cloth-covered memory foam, and they weigh 390 g without the cable. Passive isolation is more than 34 dB above 4 kHz, and impedance is 150 Ω. A 6.3 mm adapter and a cloth pouch are in the box.
Against a common listening target, bass (60–250 Hz) and sub-bass (20–60 Hz) both sit 3.0 dB above it, and the mids (250 Hz–2 kHz) stay within 1 dB. The air band (10–20 kHz) is 2.7 dB below the target. Owning studio headphones is the first step; pretending to understand a mixing desk is the second.
Specs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$499
30-day low
MSRP
$499
list price
Used, lowest
$494.94
30-day low
The technical bits
Sound
150Ω
114 dB/V
Driver Type
Driver Size
38mm
5Hz-30kHz
Weight
390g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Neumann NDH20 (150 Ω, 114 dB/V). 100 dB needs about 0.27 mW; with our 10 dB reserve, about 2.7 mW.

Violectric
HPA V222
Rated 3.7 W balanced into 100 Ω.
One Headphone outputs (balanced and 6.3 mm) output.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 2 W balanced into 120 Ω.
One balanced output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Neumann NDH20: 150 Ω, 114 dB/V (source)
Violectric HPA V222
FiiO K19
Compare
Where to buy

Neumann NDH20
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
Singxer SA-1
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.