launch · Amplifiers · Announced
TEAC AP-701-X retunes the AP-701 for a January launch in Japan
TEAC says its revised needle meters read the signal with less effect on the audio passing through the amplifier.
audiophila. news desk · How we write

TEAC has revised its stereo speaker amp with the TEAC AP-701-X, which lists in Japan at ¥528,000 including tax. A power amplifier takes an analog signal and raises its voltage and current to drive speakers that don’t have amps of their own. TEAC says its changes aim to reduce interference between circuits and limit the influence of the meters on the audio signal.
What’s new
TEAC revised the electrical ground layout in the buffer circuit and says the change reduces interference between circuits. The company also retuned the buffer’s power supply, components, and operating current.
Twin needle meters show the signal level, with four brightness settings and two sensitivity settings. TEAC says the revised meter circuit has less effect on the audio signal it reads. The circuits that control and power the amp were redesigned to reduce sources of electrical noise and cut unnecessary operating current, according to TEAC.
Why it matters
The left and right channels don’t share circuitry between the inputs and speaker outputs, and each has its own power supply. There’s no cooling fan to hear if you put the amp near your listening seat.
How it stacks up
TEAC based the new amp on the AP-701 and retuned the buffer, meter, control and power circuits. The earlier AP-701 lists at $3,999.99 in the US catalog, while the X price TEAC has announced so far is for Japan.
The companion TEAC UD-701N-X handles network playback and volume control, and its digital-to-analog converter turns digital music into an analog signal. TEAC says it designed the UD-701N-X’s network hardware with future music services in mind; the AP-701-X takes analog audio and drives speakers.
Who it’s for
Consider the AP-701-X if you already have a source with volume control and need a separate amp for passive speakers rated from 4 Ω to 8 Ω.
Who should skip it
Skip it if you need the same box to take a digital source and control the volume.
Specs
- Frequency Response
- 10 Hz–50 kHz (+0 dB/−6 dB)
- Weight
- 9.9 kg
- THD
- 0.003%
- Output Power
- 2 × 135 W into 8 Ω; 2 × 230 W into 4 Ω (rated, 1% THD, 1 kHz); JEITA practical maximum 170 W / 260 W per channel
- Inputs
- Balanced XLR; RCA (input sensitivity 1.6 V); 12 V trigger in
- Outputs
- Speaker terminals (4–8 Ω loads); 12 V trigger thru
- Amplification
- Class D (two TEAC-tuned Hypex Ncore modules, dual-mono)
- Phono Preamp
- None
- DAC
- External
Questions
- When does the AP-701-X go on sale in Japan?
TEAC announced the amp on November 18, 2026. The Japanese release sets the first sale there for January 30, 2027, in silver and black.
What we don’t know yet
The Japanese release gives neither a US list price nor a US release date.