Your rig deserves a home. Catalog your gear and get your own A-number. Free, always.

Amps, DACs & sources

USB dongle

Also called dongle DAC, DAC dongle, dongle

A USB dongle is a pocket DAC and headphone amplifier on a short cable. It plugs into a phone’s or laptop’s USB port, takes digital audio and drives headphones from its own socket, doing the job of the headphone jack most phones no longer have.

A dongle holds the same chain as a desktop DAC and amplifier, shrunk to the size of a thumb: a USB receiver, a DAC chip and a small headphone amplifier, all powered by the phone or computer through the USB connection. The phone sends the music as data; the dongle converts it, amplifies it and passes it to the headphones.

They range from plain adapters with a 3.5mm socket to larger units with a 4.4mm balanced output, more voltage, volume buttons and a small display. The plain ones handle sensitive IEMs and portable headphones well. The larger ones exist for 300 Ω headphones, insensitive planars and balanced cables, at the cost of more battery drain and a bigger lump on the end of the cable.

A USB-C to 3.5mm adapter is not always just a wire. A passive one is, and it works only with phones that can send analog audio over the USB-C port, which many current phones cannot. Everything else needs an active adapter with a DAC inside, and that is a dongle, whatever the packaging calls it.

Common questions

Does a dongle DAC improve sound quality?

It depends on what it replaces. On a phone without a headphone jack the dongle is the only analog output, so the question becomes which dongle. Against a laptop’s noisy jack, a dongle often removes hiss and interference. Against a basic adapter driving sensitive IEMs, a costlier dongle usually measures better without sounding very different. The clearest gains come with demanding headphones that a basic adapter cannot drive loud enough.

Is Apple’s USB-C headphone adapter a DAC?

Yes. Apple’s USB-C to 3.5 mm Headphone Jack Adapter contains a small DAC and headphone amplifier, so it is a dongle in every technical sense. It measures cleanly and is quiet enough for sensitive IEMs. Its limit is output voltage: it suits earphones and easy portable headphones, and runs out of volume with high-impedance or insensitive models, where a larger dongle or a desktop amplifier helps.

Should you get a dongle DAC or a DAP?

Get a dongle if you stream from your phone and want better output for little money; it uses the apps you already have. Get a DAP if you keep a large library of your own files, want music that does not drain or interrupt the phone, or need physical controls. A dongle draws on the phone’s battery, which matters on long trips; a DAP brings its own.

How does a dongle compare with a desktop DAC and amp?

With sensitive earphones there is often no audible difference. The gap is power and connections: most balanced dongles are rated at a few hundred milliwatts into 32 Ω, with a few makers claiming about a watt, while desktop headphone amplifiers commonly reach one to several watts. A desktop unit also adds line outputs for speakers, extra inputs and a proper volume knob. For a 300 Ω headphone or an insensitive planar, the desktop unit is the safer choice.

How do you use a dongle DAC on a PC?

Plug it into a USB port and select it as the output device in Windows sound settings; Windows 10 and later include a driver for USB audio, so most dongles need no installation. Set the volume low before the first play, then raise it with music running. On a Mac the dongle appears in Sound settings in the same way. A few models offer an optional driver or app for firmware and filter settings.

Related terms