Your rig deserves a home. Catalog your gear and get your own A-number. Free, always.

Amps, DACs & sources

Transport

Also called CD transport, digital transport, disc transport

A transport reads music from a disc and sends it out as digital data for a separate DAC to convert. A CD transport is a CD player with digital outputs only, usually coaxial or optical, and no analog stage of its own.

The drive is the same as in a CD player: a laser reads the pits, a servo keeps it on track, and error correction repairs what scratches and dust obscure. The result, 16-bit, 44.1 kHz PCM, leaves over coaxial or optical S/PDIF, sometimes I2S or USB, for a DAC. Any CD player with a digital output can do the same job, and many owners use an old one this way.

A transport is not a streamer. A streamer fetches files from a network or a service; a transport plays physical media. The two meet in what is sometimes called a streaming transport, a streamer with digital outputs and no DAC, but that device has no disc drive. The word is older than digital audio: a tape deck’s transport is the mechanism that moves the tape past the heads.

People buy one to keep playing a CD collection while upgrading the DAC separately, or because their DAC is better than the one inside the player they have. A computer drive ripping discs to FLAC does a transport’s job once per disc, after which the discs can retire to the shelf.

Common questions

Do CD transports sound different?

They send the same data, so any differences come from timing and noise rather than the bits. A transport in good order delivers a bit-perfect stream from an undamaged disc; the debate is about jitter on the S/PDIF link and electrical noise reaching the DAC. Measurements at the output of a well-designed DAC, which rejects most incoming jitter, usually show little or no difference. Some listeners report clear differences, and we do not take a side.

Can a CD transport play SACDs?

Only the CD layer. A hybrid SACD carries an ordinary CD layer that any CD transport plays, plus a high-resolution DSD layer that needs an SACD drive. A single-layer SACD will not play. Even SACD players do not normally send the high-resolution layer through coaxial or optical outputs, because of the format’s copy protection; at best they send a CD-quality conversion. DSD goes out over HDMI or a maker’s own link, where at all.

Does a CD player need a DAC?

No. A CD player has a DAC built in and analog outputs, usually RCA sockets, that go straight to an amplifier’s line input, such as CD or AUX. A transport is the version without one, and that does need an external DAC. Many CD players have both analog outputs and a digital output, so you can start with the built-in converter and move to an external DAC later without replacing the player.

Why are CD transports so expensive?

The expensive ones reflect a small market and scarce parts. Few companies still make CD drive mechanisms, and high-end transports add heavy chassis, separate power supplies and custom clocks, sold in small numbers. The cheap route works too: any working CD, DVD or Blu-ray player with a coaxial or optical output can serve as a transport for CDs. Whether the costly ones deliver a better signal to the DAC is disputed.

Do CD player lasers wear out?

Yes. The laser diode in the pickup weakens with use, and the first signs are discs that take longer to load, skip or fail to play, usually recordable CD-Rs first, since they reflect less light than pressed discs. Dust on the lens causes the same symptoms, so a lens-cleaning disc is worth trying first. Replacement pickups exist for many mechanisms, though parts for some older or specialized drives are no longer made.

Related terms