The Grado GR8 is an IEM with a single moving armature driver per channel and no crossover, released in 2009. It is rated at 120 ohms and 118 dB/1mW.
IEMs · Moving armature · 120 Ω · 118 dB/mW
No members own one yet. Own one? Add it to your collection
Released
2009
discontinued
Impedance
120Ω
118 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Frequency Response
20Hz-20kHz
MSRP
$299
no live price today
About
The overall weight is 9 grams, including the headphone cable. A raised dot on the left earphone gives tactile identification, so it can be put on correctly even in the dark. The fixed cable uses oxygen-free copper wires and ends in a standard 3.5mm mini plug, gold over brass.
Maximum input power is 20mW. The accessories include 3 pairs of ear tips in small, medium and large.
Specs
120Ω
118 dB/mW
Driver Type
Moving armature
20Hz-20kHz
Weight
9g
The technical bits
What to pair it with
All of these have enough power for the Grado GR8 (120 Ω, 118 dB/mW). 100 dB needs about 0.016 mW; with our 10 dB reserve, about 0.16 mW.
This headphone is very sensitive, so an amp's background hiss may be audible. Check the amp's noise specs.

Violectric
HPA V222
Rated 3.7 W balanced into 100 Ω.
One Headphone outputs (balanced and 6.3 mm) output.
No
Cable
Fixed
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 2 W balanced into 120 Ω.
One balanced output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Grado GR8: 120 Ω, 118 dB/mW (source)
Violectric HPA V222
FiiO K19
Singxer SA-1
FiiO K17
Where to buy
Grado GR8
IEMs
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.