Closed-back wireless gaming headphones from Sony, released in 2023 with 40 mm dynamic drivers and a 2.4 GHz transceiver. The battery lasts up to 28 hours, and 10 minutes of charging gives about 3 hours.
Headphones · Closed-back · Dynamic · 21 Ω · 89 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
3 yrs
since 2023
Impedance
21Ω
89 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Driver Size
40 mm
MSRP
$149.99
no live price today
About
A supplied 1.5 m headphone cable with an L-shaped 4-pole mini plug offers a wired route, though the volume dial, game-chat balance and INZONE Hub do not work over it. The boom microphone sits on the left earcup, and a GAME/CHAT button balances game sound against voice chat.
Over the cable, impedance is 21 Ω and sensitivity 89 dB/mW; the headset weighs 260 g. Wireless range is about 10 m in line of sight, and the list price was $149.99. The phrase 'one more round' has tested more headset batteries than any laboratory ever will.
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$128
30-day low
MSRP
$149.99
list price
The technical bits
What to pair it with
All of these have enough power for the Sony INZONE H5 (21 Ω, 89 dB/mW). 100 dB needs about 13 mW; with our 10 dB reserve, about 130 mW.

Singxer
SA-1
Rated 10 W balanced into 16 Ω.
One balanced output.

Benchmark
HPA4
Rated 6 W into 16 Ω.
Specs
21Ω
89 dB/mW
Driver Type
Driver Size
40 mm
5 Hz – 20 kHz
Weight
260g
Design
Yes
Cable
Detachable
Price history for 2,173 of 5,765 products
As an Amazon Associate audiophila. earns from qualifying purchases.
One THX-888 headphone output output.

FiiO
K19
Rated 4 W SE, 4 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 1.8 W SE, 1.8 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Sony INZONE H5: 21 Ω, 89 dB/mW (source)
Singxer SA-1
Benchmark HPA4
FiiO K19
FiiO K17
Where to buy

Sony INZONE H5
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.