Open-back wired gaming headphones from Sony, released in 2026 with 40 mm dynamic drivers and a detachable boom microphone. The headset weighs 199 g without its cable and microphone.
Headphones · Open-back · Dynamic · 28 Ω · 99 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
New
since 2026
Impedance
28Ω
99 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
About
Its driver technology is inspired by Sony's MDR-MV1 professional monitor headphones. The 4-pole cable plugs into a PS5 controller, or into the supplied USB Type-C audio box for a computer. Through that box, the INZONE Hub software adds equaliser settings and dynamic range control.
Impedance is 28 Ω and sensitivity 99 dB/mW, and the rated response runs 5 Hz – 80 kHz, or 10 Hz – 20 kHz through the audio box. It was listed at $199.99. A boom mic that comes off for music keeps the team chat and the record collection on speaking terms.
Price tracker
In stock on Amazon today · new and used prices, checked daily.
New, lowest
$168
30-day low
MSRP
$199.99
list price
The technical bits
Sound
Specs
28Ω
99 dB/mW
Driver Type
Driver Size
40 mm
5 Hz – 80 kHz (headset); 10 Hz – 20 kHz (USB-C audio box)
Weight
199g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Sony INZONE H6 Air (28 Ω, 99 dB/mW). 100 dB needs about 1.3 mW; with our 10 dB reserve, about 13 mW.

Singxer
SA-1
Rated 10 W balanced into 16 Ω.
One balanced output.

Benchmark
HPA4
Rated 6 W into 16 Ω.
One THX-888 headphone output output.

FiiO
K19
Rated 4 W SE, 4 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 1.8 W SE, 1.8 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Sony INZONE H6 Air: 28 Ω, 99 dB/mW (source)
Singxer SA-1
Benchmark HPA4
FiiO K19
Compare
Where to buy

Sony INZONE H6 Air
Headphones
In stock
Checked today 06:01 UTC · As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.