Wired gaming IEMs from Sony, released in 2025 with 5 mm dynamic drivers and a supplied USB Type-C audio box. They weigh about 4.7 g, and the cable detaches at an INZONE plug.
IEMs · Closed-back · Dynamic · 16 Ω · 101 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
1 yr
since 2025
Impedance
16Ω
101 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
About
On a computer they run through the USB Type-C audio box; on a PS5 they plug straight into the controller's headphone socket. Through the box, the INZONE Hub software for Windows 10 or later sets the equaliser, dynamic range control and spatial sound.
Impedance is 16 Ω, sensitivity is 101 dB/mW and the rated response runs 10 Hz – 20 kHz. Hybrid silicone and noise isolation ear tips come in four sizes each, along with a carrying case, and the list price was $149.99. Gaming gear and hi-fi IEMs used to live in separate drawers, and the drawers are slowly merging.
Price tracker
In stock on Amazon today · new and used prices, checked daily.
New, lowest
$118
30-day low
MSRP
$149.99
list price
Used
$79.99
used, typical ask · 9 listings
The technical bits
Sound
Specs
16Ω
101 dB/mW
Driver Type
Driver Size
5 mm
10 Hz – 20 kHz
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Sony INZONE E9 (16 Ω, 101 dB/mW). 100 dB needs about 0.79 mW; with our 10 dB reserve, about 7.9 mW.

Singxer
SA-1
Rated 10 W balanced into 16 Ω.
One balanced output.

Benchmark
HPA4
Rated 6 W into 16 Ω.
One THX-888 headphone output output.

FiiO
K19
Rated 4 W SE, 4 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 1.8 W SE, 1.8 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Sony INZONE E9: 16 Ω, 101 dB/mW (source)
Singxer SA-1
Benchmark HPA4
FiiO K19
Compare
Where to buy

Sony INZONE E9
IEMs
In stock
Checked today 07:01 UTC · As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.