Open-back dynamic headphones from Grado's Statement Series, released in 2014 with 50mm drivers and mahogany housings. Its voice coils are made of high-purity, large-crystalline copper.
Headphones · Open-back · Dynamic · 32 Ω · 99.8 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
12 yrs
since 2014
Impedance
32Ω
99.8 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Driver Size
50mm
Frequency Response
8Hz-35kHz
About
Frequency response runs from 8Hz to 35kHz, impedance is 32 Ω and sensitivity is 99.8 dB. The drivers are matched between channels to within 0.05 dB.
It weighs 260 g, its cable is fixed, and a 3.5mm mini adapter and a 3.6 m extension cable come with it. Wooden cups have a habit of turning a desk into a display shelf.
Specs
The technical bits
What to pair it with
All of these have enough power for the Grado GS1000e (32 Ω, 99.8 dB/mW). 100 dB needs about 1 mW; with our 10 dB reserve, about 10 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 5.5 W balanced into 32 Ω.
32Ω
99.8 dB/mW
Driver Type
Driver Size
50mm
8Hz-35kHz
Weight
260g
Design
No
Cable
Fixed
One balanced output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

JDS Labs
Element IV
Rated 3.2 W into 32 Ω.
One 6.35 mm output.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Grado GS1000e: 32 Ω, 99.8 dB/mW (source)
FiiO K19
Singxer SA-1
FiiO K17
JDS Labs Element IV
Where to buy

Grado GS1000e
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.