Open-back dynamic headphones from Grado's Professional Series, with 50mm drivers and a $1,695 list price. The cups combine a hand-crafted mahogany inner sleeve with a chrome-plated aluminium outer housing.
Headphones · Open-back · Dynamic · 32 Ω · 99.8 dB/mW
No members own one yet. Own one? Add it to your collection
Driver Size
50mm
Impedance
32Ω
99.8 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Frequency Response
5Hz-50kHz
MSRP
$1,695
no live price today
About
It went on sale in 2014 as the new flagship of Grado's headphone line. The 50mm driver has a reconfigured voice coil and diaphragm, and the fixed twelve-conductor cable uses UHPLC copper.
Impedance is 32 Ω and sensitivity 99.8 dB, and What Hi-Fi reports a weight of 483 g excluding the cable. A 3.5mm mini adapter and an extension cable come in the box. A fixed cable is one decision taken out of the owner's hands, and some listeners find that restful.
What Hi-Fi reports 483 g excluding the cable. This reviewer-reported figure is not a manufacturer-confirmed total weight.
Specs
The technical bits
What to pair it with
All of these have enough power for the Grado PS1000e (32 Ω, 99.8 dB/mW). 100 dB needs about 1 mW; with our 10 dB reserve, about 10 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 5.5 W balanced into 32 Ω.
32Ω
99.8 dB/mW
Driver Type
Driver Size
50mm
5Hz-50kHz
Weight
483g
Design
No
Cable
Fixed
One balanced output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

JDS Labs
Element IV
Rated 3.2 W into 32 Ω.
One 6.35 mm output.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Grado PS1000e: 32 Ω, 99.8 dB/mW (source)
FiiO K19
Singxer SA-1
FiiO K17
JDS Labs Element IV
Where to buy

Grado PS1000e
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.