Open-back Focal headphones for sound engineers and producers, with 40 mm drivers using magnesium diaphragms and a 55 Ω impedance. They weigh 450 g and have a sensitivity of 104 dB.
Headphones · Dynamic · 55 Ω · 104 dB/mW
No members own one yet. Own one? Add it to your collection
Driver Size
40 mm
Impedance
55Ω
104 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Frequency Response
5 Hz – 23 kHz
Weight
450 g
About
The grille inside each earcup follows the 'M' profile of the membrane, and the outside of the cups carries a honeycomb pattern. The solid aluminium yoke lacks the traditional vertical rotation mechanism, which is offset within the headband.
The listed frequency response is 5 Hz – 23 kHz, with a break-up at 28 kHz. They need a running-in period of several hours of listening to reach full performance. Several hours of running-in also happens to be a fine excuse for several hours of music. A carrying case, replacement pads, a 5 m coiled cable and a 1.2 m straight cable with a 3.5 mm jack are included.
Specs
55Ω
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$1,149
30-day low
The technical bits
What to pair it with
All of these have enough power for the Focal Clear Mg Professional (55 Ω, 104 dB/mW). 100 dB needs about 0.4 mW; with our 10 dB reserve, about 4 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.
104 dB/mW
Driver Type
Driver Size
40 mm
5 Hz – 23 kHz
Weight
450g
Rated 5.5 W balanced into 32 Ω.
One balanced output.

Violectric
HPA V222
Rated 3.4 W balanced into 50 Ω.
One Headphone outputs (balanced and 6.3 mm) output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Focal Clear Mg Professional: 55 Ω, 104 dB/mW (source)
FiiO K19
Singxer SA-1
Violectric HPA V222
FiiO K17
Where to buy

Focal Clear Mg Professional
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.