Open-back dynamic headphones from Grado's Prestige series, released in 2021 at $295 with 44 mm drivers. Each pair is hand-assembled in Brooklyn, with brushed aluminium housings and a leather headband.
Headphones · Open-back · Dynamic · 38 Ω · 99.8 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
5 yrs
since 2021
Impedance
38Ω
99.8 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$295
no live price today
About
The cable is fixed, an 8-conductor design, and a 6.5 mm adapter comes in the box. Impedance is 38 Ω, sensitivity is 99.8 dB and the headphones weigh 240 g. Open-backs like these share the music with the room, which suits listeners with nothing to hide.
Against a common listening target, the mids (250 Hz–2 kHz) sit within 1 dB, while sub-bass (20–60 Hz) falls 7.9 dB below it. Treble (5–10 kHz) is 2.5 dB below the target, and the air band (10–20 kHz) is 1.1 dB above.
Specs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
MSRP
$295
list price
Used, lowest
$256.03
30-day low
The technical bits
Sound
38Ω
99.8 dB/mW
Driver Type
Driver Size
44mm
18Hz-24kHz
Weight
240g
Design
No
Cable
Fixed
What to pair it with
All of these have enough power for the Grado SR325x (38 Ω, 99.8 dB/mW). 100 dB needs about 1 mW; with our 10 dB reserve, about 10 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 5.5 W balanced into 32 Ω.
One balanced output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

JDS Labs
Element IV
Rated 3.2 W into 32 Ω.
One 6.35 mm output.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Grado SR325x: 38 Ω, 99.8 dB/mW (source)
FiiO K19
Singxer SA-1
Compare
Where to buy

Grado SR325x
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
FiiO K17
JDS Labs Element IV
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.