Open-back planar magnetic headphones from Audeze, launched in 2010 at $995 with 106 mm drivers and a 70 Ω impedance. At 595 g they are heavy, and they connect through dual 4-pin mini-XLR sockets.
Headphones · Open-back · Planar magnetic · 70 Ω · 101 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
16 yrs
since 2010
Impedance
70Ω
101 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$995
no live price today
About
In the box are a mini-XLR to 4-pin XLR cable, a 4-pin XLR to quarter-inch cable, a 3.5 mm adapter and a travel case. Audeze introduced its Fazor waveguides in 2014, so earlier LCD-2s are pre-Fazor models. Every revision has its loyalists, and every loyalist has a spreadsheet.
Against a common listening target, the mids (250 Hz–2 kHz) sit within 1 dB, the upper mids (2–5 kHz) 4.7 dB below and the treble (5–10 kHz) 5.0 dB below. Sub-bass (20–60 Hz) is 6.1 dB below the target, while the air band (10–20 kHz) is 3.0 dB above it.
Sensitivity is 101 dB, enough for good volume on moderate power.
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
MSRP
$995
list price
Used
$795
used, typical ask · 7 listings
The technical bits
Sound
Specs
70Ω
101 dB/mW
Driver Type
Driver Size
106mm
10Hz-50kHz
Weight
595g
Design
No
Cable
Detachable
As an Amazon Associate audiophila. earns from qualifying purchases.
What to pair it with
All of these have enough power for the Audeze LCD-2 (70 Ω, 101 dB/mW). 100 dB needs about 0.79 mW; with our 10 dB reserve, about 7.9 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 3.1 W balanced into 68 Ω.
One balanced output.

Violectric
HPA V222
Rated 3.4 W balanced into 50 Ω.
One Headphone outputs (balanced and 6.3 mm) output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Audeze LCD-2: 70 Ω, 101 dB/mW (source)
FiiO K19
Singxer SA-1
Compare
Where to buy

Audeze LCD-2
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
Violectric HPA V222
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.