Open-back planar magnetic headphones from Audeze with 106mm drivers, released in 2017 at $2,995 for mixing and mastering. They weigh 575 g, with a 20 Ω impedance and 105 dB sensitivity.
Headphones · Open-back · Planar magnetic · 20 Ω · 105 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
9 yrs
since 2017
Impedance
20Ω
105 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$2,995
no live price today
About
The chassis is magnesium with a carbon-fibre suspension headband. The drivers use a Double Fluxor magnet array with N50 neodymium magnets, and more than 250mW is recommended.
Against a common listening target, the air band (10–20 kHz) sits within 1 dB of it and the mids (250 Hz–2 kHz) 1.5 dB below. The upper mids (2–5 kHz) and treble (5–10 kHz) sit 8.3 dB and 8.7 dB below the target, and sub-bass (20–60 Hz) 7.6 dB below. Mastering engineers and hobbyists share one habit: checking a mix on one more pair before calling it done.
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
MSRP
$2,995
list price
The technical bits
Sound
Specs
20Ω
105 dB/mW
Driver Type
Driver Size
106mm
10Hz-50kHz
Weight
575g
Design
No
Cable
Detachable
As an Amazon Associate audiophila. earns from qualifying purchases.
What to pair it with
All of these have enough power for the Audeze LCD-MX4 (20 Ω, 105 dB/mW). 100 dB needs about 0.32 mW; with our 10 dB reserve, about 3.2 mW.

Singxer
SA-1
Rated 10 W balanced into 16 Ω.
One balanced output.

Benchmark
HPA4
Rated 6 W into 16 Ω.
One THX-888 headphone output output.

FiiO
K19
Rated 4 W SE, 4 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 1.8 W SE, 1.8 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Audeze LCD-MX4: 20 Ω, 105 dB/mW (source)
Singxer SA-1
Benchmark HPA4
FiiO K19
Compare
Where to buy

Audeze LCD-MX4
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.