Closed-back studio headphones from AKG with 40 mm dynamic drivers, released in 2016 and listed at $79. The fixed 3 m cable ends in a 3.5 mm plug with a 6.3 mm screw-on adapter.
Headphones · Closed-back · Dynamic · 32 Ω · 112 dB/V
No members own one yet. Own one? Add it to your collection
On sale
10 yrs
since 2016
Impedance
32Ω
112 dB/V
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$79
no live price today
About
It has a self-adjusting headband and replaceable leatherette ear pads, and weighs 200 g. Impedance is 32 Ω and sensitivity is 112 dB. Every studio seems to own at least one pair of closed headphones that nobody remembers buying.
Against a common listening target, bass (60–250 Hz) sits 7.1 dB above it and sub-bass (20–60 Hz) 4.3 dB above. The upper mids (2–5 kHz) dip 4.5 dB below the target, while treble (5–10 kHz) sits 4.9 dB above it.
Specs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$49.95
30-day low
MSRP
$79
list price
Used
$36.12
used, typical ask · 6 listings
The technical bits
Sound
32Ω
112 dB/V
Driver Type
Driver Size
40mm
16Hz-20kHz
Weight
200g
Design
No
Cable
Fixed
What to pair it with
All of these have enough power for the AKG K72 (32 Ω, 112 dB/V). 100 dB needs about 2 mW; with our 10 dB reserve, about 20 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 5.5 W balanced into 32 Ω.
One balanced output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

JDS Labs
Element IV
Rated 3.2 W into 32 Ω.
One 6.35 mm output.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
AKG K72: 32 Ω, 112 dB/V (source)
FiiO K19
Singxer SA-1
FiiO K17
Where to buy

AKG K72
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
JDS Labs Element IV
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.