Open-back reference studio headphones from AKG, released in 2008 at $349, with flat-wire voice coils and Varimotion two-layer diaphragms. The cable detaches at a mini-XLR connector, so it is easy to replace or upgrade.
Headphones · Open-back · Dynamic · 62 Ω · 105 dB/V
No members own one yet. Own one? Add it to your collection
On sale
18 yrs
since 2008
Impedance
62Ω
105 dB/V
Rating
—
be the first to rate
Owners
0
be the first
Measured
2
frequency curves
MSRP
$349
no live price today
About
They were designed for critical listening, mixing and mastering. Impedance is 62 Ω, with a 3 m cable and a self-adjusting leather headband. Studio headphones have a habit of ending up on hi-fi desks where nothing is being mixed at all.
Against a common listening target, the bass (60–250 Hz), mids and treble (5–10 kHz) all sit within 1 dB. Sub-bass (20–60 Hz) is 4.6 dB below the target, and the air band (10–20 kHz) 2.5 dB above it.
Specs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$253.99
30-day low
MSRP
$349
list price
Used, lowest
$146.99
30-day low
The technical bits
Sound
62Ω
105 dB/V
Driver Type
Driver Size
45mm
10Hz-39.8kHz
Weight
235g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the AKG K702 (62 Ω, 105 dB/V). 100 dB needs about 5.1 mW; with our 10 dB reserve, about 51 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 5.5 W balanced into 32 Ω.
One balanced output.

Violectric
HPA V222
Rated 3.4 W balanced into 50 Ω.
One Headphone outputs (balanced and 6.3 mm) output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
AKG K702: 62 Ω, 105 dB/V (source)
FiiO K19
Singxer SA-1
Compare
Where to buy

AKG K702
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
Violectric HPA V222
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.