Back to FiiO KA1
FiiO KA1
DACs

FiiO

FiiO KA1 DAC

9/10
Broke Audio
Broke Audio
A-218·4d ago

Pros

  • Wakes up high-impedance headphones
  • Clean, crisp, balanced and powerful sound
  • Tiny, light, sturdy metal body
  • Wide PCM, DSD and MQA support
  • Colour-changing status LED

Cons

  • Cable is short at about 70 mm
  • Braided cable may fray over time
  • Sound leans bright

A tiny metal USB DAC and amp that wakes up hard-to-drive headphones.

TL;DR

The FiiO KA1 is a very small, metal-bodied DAC and headphone amp that gives high-impedance headphones the drive a laptop output cannot.

Sound is big, dynamic, clean and a little bright, with broad format support and a colour-coded status light.

I liked it enough to plan a second one in Lightning form, and it is a leading candidate for my portable DAC of the year.

Specs

  • Two versions: USB-C or Lightning

  • DAC chip: ES9281AC Pro

  • Output: 3.5 mm headphone jack

  • Output power: about 45 mW at 32 ohms

  • PCM up to 32-bit/384 kHz

  • DSD64/128 over DoP, native DSD64/128/256

  • Hi-Res certified, MQA rendering

  • Cable length about 70 mm

  • Weight about 10 g

  • Size about 40 x 15 x 8 mm

  • Works with Android, iOS, Windows and macOS

What's in the box

  • KA1 dongle

  • USB-A adapter

A long-time fan of the brand

FiiO has been part of my listening life for years. Their gear has a reputation for being dependable, and the company has consistently priced things so that both seasoned enthusiasts and people on a tight budget can join in. I still keep an older FiiO A3 around. It has taken a few knocks and keeps working, though it has earned a retirement upgrade. So when the KA1 landed on my desk, I was keen to hear it. I will say up front that I have less to say about this little dongle than I would about a bigger product, and nearly all of it is positive.

How the KA1 rescued my work headphones

My usual work headphones were a pair of closed-back Fostex TH-X00 that I picked up secondhand a few years back. I love their deep, fun sound, and they put a grin on my face every time. Then one of the earcup hinges snapped, my own fault for forcing them into a case that was too small.

As a stand-in I took my Beyerdynamic DT 1990 Pro to the office, since they are the closest thing I own to my gaming headphones and normally stay home. I plugged them straight into my MacBook and felt let down at once. They sounded dull and sad, and for days I tried to remember why I had ever loved them.

Plenty of you will already have spotted the cause. I had been busy with a lot of headphone reviews and simply forgot that the DT 1990 Pro is a 250 ohm design. A laptop headphone output has nowhere near the drive needed to wake it up.

I had not worked that out when the KA1 turned up. I unboxed it immediately, hooked it to the MacBook via USB-C, and the Beyerdynamics suddenly felt like a gift. They did not merely come back to life. They revealed dynamics I had not noticed in them before. The more I listened, the more impressed I was by how clean, crisp, balanced and strong the sound became.

Since then I have kept pulling headphones off the shelf to see what else it can do, including the old favourite HD 600 and the budget-friendly 1More monitors, which are also fairly high in impedance.

Build and daily use

Judging by my time with it so far, the build is very good. FiiO has squeezed plenty of capability into a very small, solid metal shell.

I have read a few remarks that the braided cable can fray and start to unravel with use. I would not expect that to harm the sound; the cost would be cosmetic, with the strands separating. For me it is unlikely to come up anyway. I have the USB-C version, and the only places I use it are at the office and at home, which is where all my USB-C sources live. For an older MacBook I have at home, there is a USB-A adapter that works with the USB-C model, which you can see in the photos.

Tech specs

There are two KA1 versions, ending in either a USB-C or a Lightning plug. The built-in cable runs about 70 mm. It is brief, yet adequate for the way this is meant to be used. Total weight is about 10 grams, and the body measures roughly 40 x 15 x 8 mm.

Inside is an ES9281AC Pro DAC chip, and the output is a 3.5 mm headphone socket that delivers roughly 45 mW into 32 ohms.

File support is wide. PCM goes up to 32-bit/384 kHz, DSD64 and DSD128 are accepted over DoP, and native DSD64, DSD128 and DSD256 play too. It is Hi-Res Audio certified, can render MQA, and works with Android, iOS, Windows and macOS.

My favourite part is that a device this compact still has a bit of flair. An RGB status light changes colour according to what it is playing. At 48 kHz or lower the light is blue, above 48 kHz it turns yellow, DSD shows green, and MQA content lights it purple. It is a fun touch, especially if you enjoy loading different files just to see which colour appears.

So far I have only used Spotify with it, since I expect most people will run a dongle like this from a phone while out and about. Having seen how much it can drive, though, I am about to load up some lossless files and try to coax out the other colours.

As noted, you can pick the USB-C or Lightning termination, and the box also includes an extra adapter for USB-A.

Conclusion

This little device has won me over completely. Two of my existing pairs of headphones now sound like different products, and both the drive and the format flexibility are excellent at this size.

It slips into a pocket, and I plan to buy the Lightning version for travelling with my iPhone, so that one lives on my desk and the other goes in my bag.

Overall the presentation is large, lively and a touch bright, and I expect it to improve nearly any headphones you pair with it, especially the harder-to-drive ones. As things stand, it is a strong contender for my portable DAC of the year.

Rating Breakdown

WarmBright
CompressedDynamic
NoisySilent
Build Quality50
FlimsyTank
Design50
PlainBeautiful
Value50
OverpricedBargain

Discussion(1)

Sign in to join the discussion

Love mine but I’ve lost it. Maybe upgrade to the ka-2