Noble Audio Stage 3 is a wired hybrid in-ear monitor with a 10 mm dynamic driver and two balanced armatures. Its detachable cable includes interchangeable 2.5 mm, 3.5 mm and 4.4 mm plugs.
IEMs · Hybrid · 27 Ω · 108 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
3 yrs
since 2023
Impedance
27Ω
108 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Frequency Response
20 Hz – 20 kHz
Cable
Detachable
About
The three-driver system sits in a 3D-printed resin housing. A stainless-steel nozzle includes a wax guard, while replaceable ear tips provide the universal fit. This construction combines a dynamic driver and balanced armatures within each earpiece rather than using a single full-range transducer.
An eight-core OCC cable detaches at the 0.78 mm two-pin earpiece connections. Its interchangeable source plugs provide 2.5 mm balanced, 3.5 mm single-ended and 4.4 mm balanced options. The selected plug needs to match the source’s output and wiring.
Specs
The technical bits
What to pair it with
All of these have enough power for the Noble Audio Stage 3 (27 Ω, 108 dB/mW). 100 dB needs about 0.16 mW; with our 10 dB reserve, about 1.6 mW.

Singxer
SA-1
Rated 10 W balanced into 16 Ω.
One balanced output.

Benchmark
HPA4
Rated 6 W into 16 Ω.
27Ω
108 dB/mW
Driver Type
20 Hz – 20 kHz
No
Cable
Detachable
One THX-888 headphone output output.

FiiO
K19
Rated 4 W SE, 4 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 1.8 W SE, 1.8 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Noble Audio Stage 3: 27 Ω, 108 dB/mW (source)
Singxer SA-1
Benchmark HPA4
FiiO K19
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.