64 Audio's A5 is a custom-fit wired IEM with 5 balanced armature drivers and a 2-way crossover, now discontinued. Reference tuning is the hobby's most repeated promise and its least agreed-upon definition.
IEMs · Balanced Armature · 17 Ω · 118 dB/mW
No members own one yet. Own one? Add it to your collection
Frequency Response
10 Hz – 20 kHz
Impedance
17Ω
118 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
About
Like the A10, it was designed as a reference monitor, and it uses the same balanced armature drivers as the A10 for the highs. The crossover splits the work into 1 driver for the lows and 4 drivers for the mids and highs. It is built around apex technology, which was developed to protect the eardrum.
Impedance is 17 Ω and sensitivity 118 dB, with a frequency response of 10 Hz to 20 kHz. Isolation is rated at 6 to 26 dB.
Specs
The technical bits
What to pair it with
All of these have enough power for the 64 Audio A5 (17 Ω, 118 dB/mW). 100 dB needs about 0.016 mW; with our 10 dB reserve, about 0.16 mW.
This headphone is very sensitive, so an amp's background hiss may be audible. Check the amp's noise specs.

Singxer
SA-1
Rated 10 W balanced into 16 Ω.
One balanced output.
17Ω
118 dB/mW
Driver Type
10 Hz – 20 kHz
No
Rated 6 W into 16 Ω.
One THX-888 headphone output output.

FiiO
K19
Rated 4 W SE, 4 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 1.8 W SE, 1.8 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
64 Audio A5: 17 Ω, 118 dB/mW (source)
Singxer SA-1
Benchmark HPA4
FiiO K19
FiiO K17
Where to buy

64 Audio A5
IEMs
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.