JCally's EP01 are wired earbuds with a 15.4mm dynamic driver, a 32 Ω impedance and 112 dB sensitivity. They weigh 20 g, with a 20Hz-20kHz frequency response.
Earbuds · Dynamic · 32 Ω · 112 dB
Broke Audio used to own one · Own one? Add it
Driver Size
15.4mm
Impedance
32Ω
112 dB (reference not recorded)
Rating
—
more ratings needed
Owners
0
be the first
Frequency Response
20Hz-20kHz
Weight
20 g
About
Specs
32Ω
112 dB (reference not recorded)
Driver Type
Driver Size
15.4mm
20Hz-20kHz
Weight
20g
No
What owners say
Previously owned by audiophila. members. Rated 10.0/10 overall by owners.

“A cheaper EP02 in everything but a little resolution. TL;DR The EP01 is essentially a lower-priced EP02.”
— Broke Audio, owner · Read review →
Based on owner ratings · Updated 7 Nov 2026 · How ratings work
What members hear
10.0 / 10
The technical bits
Sound
Comfort & Fit
Build & Value
A cheaper EP02 in everything but a little resolution.
The EP01 is essentially a lower-priced EP02. Tuning, tonality and technical ability are strikingly alike, and both share a special quality that sets them apart from other budget flatheads.
It gives up a little resolution and gets sibilant at high volume, but the warm, musical, airy sound is excellent value.
Driver: 15.4mm single dynamic driver
Frequency response: 20Hz-20000Hz
Impedance: 32 ohm
Sensitivity: 112dB/mW
JCALLY EP01 flathead earphones
1 pair of cloth covers
Spending time with the EP01 immediately brought its newer sibling to mind. On paper and in practice the two are close relatives, yet the EP01 pushes a little more low-end quantity while keeping the same grainy, tactile bass quality. That extra…
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-15 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.