Second-generation 99 Classics headphones from Meze, with walnut wood ear cups, 40 mm dynamic drivers and a 16 Ω impedance. A compact USB-C DAC/AMP is included for devices without a headphone output.
Headphones · 16 Ω · 103 dB/mW
No members own one yet. Own one? Add it to your collection
Frequency Response
15 Hz – 25 kHz
Impedance
16Ω
103 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
About
The first 99 Classics came out in 2015. This version enlarges the cup volume, adds a bass vent in the jack shell and moves the pads to a clip-on fitting.
Each cup takes a 3.5 mm plug, and the sockets are enlarged to 7 mm so larger-bodied plugs fit. The stock cable is Kevlar-sheathed OFC, and a set of acoustic absorbers brings the sound closer to the original model.
Every part, from cups and headband to cables and driver, is replaceable, and it weighs 290 g. A headphone that ships with its own dongle has accepted the modern phone with good grace.
Specs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$239
30-day low
Used, lowest
$189.97
30-day low
The technical bits
What to pair it with
All of these have enough power for the Meze 99 Classics 2nd Gen (16 Ω, 103 dB/mW). 100 dB needs about 0.5 mW; with our 10 dB reserve, about 5 mW.

Singxer
SA-1
Rated 10 W balanced into 16 Ω.
One balanced output.
16Ω
103 dB/mW
15 Hz – 25 kHz
Rated 6 W into 16 Ω.
One THX-888 headphone output output.

FiiO
K19
Rated 4 W SE, 4 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 1.8 W SE, 1.8 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Meze 99 Classics 2nd Gen: 16 Ω, 103 dB/mW (source)
Singxer SA-1
Benchmark HPA4
FiiO K19
FiiO K17
Where to buy

Meze 99 Classics 2nd Gen
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.