Open-back dynamic headphones from Sennheiser with a 56mm Ring Radiator transducer, released in 2016 at a $1699.95 list price. Spec sheets open conversations that listening is happy to continue.
Headphones · Open-back · Dynamic · 300 Ω · 102 dB/V
No members own one yet. Own one? Add it to your collection
On sale
10 yrs
since 2016
Impedance
300Ω
102 dB/V
Rating
—
be the first to rate
Owners
0
be the first
Measured
2
frequency curves
MSRP
$1,699.95
list price
About
Sennheiser assembles the HD 800 S in Germany. They weigh 330 g without the cable and have a 300 Ω impedance. A frequency absorber is built in to minimise resonances.
Two cables come in the box, one with a 6.3mm stereo plug and one balanced with a 4.4mm Pentaconn plug.
Against a common listening target, the mids (250 Hz–2 kHz) sit within 1 dB of it. Air (10–20 kHz) sits 4.7 dB above the target, while sub-bass (20–60 Hz) runs 6.1 dB below.
Specs
Price tracker
Used prices, checked daily.
MSRP
$1,699.95
list price
Used
$1,312.50
used, typical ask · 6 listings
Tracking since 16 Nov
The technical bits
Sound
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.
300Ω
102 dB/V
Driver Type
Driver Size
56mm
4Hz-51kHz
Weight
330g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Sennheiser HD 800 S (300 Ω, 102 dB/V). 100 dB needs about 2.1 mW; with our 10 dB reserve, about 21 mW.

Violectric
HPA V222
Rated 1.8 W balanced into 300 Ω.
One Headphone outputs (balanced and 6.3 mm) output.

FiiO
K19
Rated 270 mW SE, 1.1 W balanced into 300 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 240 mW SE, 950 mW balanced into 300 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 2 W balanced into 120 Ω.
One balanced output.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Sennheiser HD 800 S: 300 Ω, 102 dB/V (source)
Violectric HPA V222
FiiO K19
FiiO K17
Compare
Singxer SA-1