Open-back planar magnetic headphones from Monoprice with 106mm drivers, released in 2016 and listed at $299. The drivers use neodymium magnets in a linear symmetry structure, and the maximum power handling is 10W.
Headphones · Open-back · Planar magnetic · 50 Ω · 96 dB
No members own one yet. Own one? Add it to your collection
On sale
10 yrs
since 2016
Impedance
50Ω
96 dB (reference not recorded)
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$299
no live price today
About
They weigh 380 g, with a 50 Ω impedance and a detachable cable. The listed optimal power requirement is 200mW to 4W. The earpads are faux leather, and the headband is padded. Planar magnetics often lead a headphone hobby straight into an amplifier one.
Against a common listening target, bass (60–250 Hz) and the mids (250 Hz–2 kHz) sit within 1 dB of it. Sub-bass (20–60 Hz) sits 4.7 dB below the target and treble (5–10 kHz) 5.4 dB below, with air (10–20 kHz) 4.9 dB above.
Specs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$28.46
30-day low
MSRP
$299
list price
The technical bits
Sound
50Ω
96 dB (reference not recorded)
Driver Type
Driver Size
106mm
10Hz-50kHz
Weight
380g
Design
No
Cable
Detachable
Price history for 2,173 of 5,765 products
As an Amazon Associate audiophila. earns from qualifying purchases.
Compare
Where to buy

Monoprice M1060
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.