Closed-back planar magnetic headphones from Meze with 92mm x 63mm drivers, released in 2024 and listed at $2,000. The ear cups are Macassar ebony, and the headband is stainless steel.
Headphones · Closed-back · Planar magnetic · 61 Ω · 100 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
2 yrs
since 2024
Impedance
61Ω
100 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$2,000
list price
About
They weigh 427 g and have a 61 Ω impedance and 100 dB sensitivity. Two detachable cables come in the box, 1.3 m and 3 m long, along with a standard-size adapter. A rigid carrying case and a faux leather case are both included. Two cases in one box is the kind of thoroughness this hobby quietly admires.
Against a common listening target, sub-bass (20–60 Hz) and the mids (250 Hz–2 kHz) sit within 1 dB of it. Bass (60–250 Hz) sits 1.9 dB above, treble (5–10 kHz) 2.6 dB below and air (10–20 kHz) 6.0 dB above.
Specs
The technical bits
Sound
61Ω
100 dB/mW
Driver Type
Driver Size
92mm x 63mm
4Hz-92kHz
Weight
427g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Meze Liric 2 (61 Ω, 100 dB/mW). 100 dB needs about 1 mW; with our 10 dB reserve, about 10 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 5.5 W balanced into 32 Ω.
One balanced output.

Violectric
HPA V222
Rated 3.4 W balanced into 50 Ω.
One Headphone outputs (balanced and 6.3 mm) output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Meze Liric 2: 61 Ω, 100 dB/mW (source)
FiiO K19
Singxer SA-1
Compare
Violectric HPA V222
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.