Closed-back dynamic headphones from Shure with 40 mm neodymium drivers, released in 2013 and listed at $499. With an aluminium alloy yoke and carbon fibre cap, they weigh 286 g.
Headphones · Closed-back · Dynamic · 46 Ω · 99 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
13 yrs
since 2013
Impedance
46Ω
99 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$499
list price
About
Dual-exit cables attach with gold-plated MMCX connectors, and two detachable cables come in the box. The ear pads use Alcantara over slow-recovery foam, and a spare pair comes with a hard travel case. Sensitivity is 99 dB and impedance 46 Ω.
Against a common listening target, bass (60–250 Hz) sits 5.2 dB above it, while the mids, upper mids and treble stay within 1 dB. A generous bass shelf has ended many a search for the perfect EQ preset.
Specs
The technical bits
Sound
46Ω
99 dB/mW
Driver Type
Driver Size
40mm
5Hz-25kHz
Weight
286g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Shure SRH1540 (46 Ω, 99 dB/mW). 100 dB needs about 1.3 mW; with our 10 dB reserve, about 13 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 5.5 W balanced into 32 Ω.
One balanced output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

JDS Labs
Element IV
Rated 3.2 W into 32 Ω.
One 6.35 mm output.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Shure SRH1540: 46 Ω, 99 dB/mW (source)
FiiO K19
Singxer SA-1
Compare
FiiO K17
JDS Labs Element IV
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.