Dan Clark Audio's flagship open-back planar magnetic headphones, launched in 2022 at $3,999 with 76 mm x 51 mm drivers. An acoustic metamaterial tuning system sits between the driver and the ear.
Headphones · Open-back · Planar magnetic · 23 Ω · 90 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
4 yrs
since 2022
Impedance
23Ω
90 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$4,499.99
no live price today
About
The 4th-generation planar driver is single-ended, and the headphones weigh 418 g. It packs into a compact case thanks to folding gimbals taken from the AEON 2. The baffle is carbon fibre and the headband nickel-titanium, and each pair is built by hand in San Diego.
Against a common listening target, the mids, upper mids and air all sit within 1 dB of it. Bass (60–250 Hz) is 2.0 dB above the target and treble (5–10 kHz) 2.1 dB below, with an impedance of 23 Ω. Calling it the last pair anyone will need is a tradition, and so is buying another one later.
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$3,499.97
30-day low
MSRP
$4,499.99
list price
The technical bits
Sound
Specs
23Ω
90 dB/mW
Driver Type
Driver Size
76mm x 51mm
10Hz-50kHz
Weight
418g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Dan Clark Audio EXPANSE (23 Ω, 90 dB/mW). 100 dB needs about 10 mW; with our 10 dB reserve, about 100 mW.

Singxer
SA-1
Rated 10 W balanced into 16 Ω.
One balanced output.

Benchmark
HPA4
Rated 6 W into 16 Ω.
One THX-888 headphone output output.

FiiO
K19
Rated 4 W SE, 4 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 1.8 W SE, 1.8 W balanced into 16 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Dan Clark Audio EXPANSE: 23 Ω, 90 dB/mW (source)
Singxer SA-1
Benchmark HPA4
FiiO K19
Compare
Where to buy

Dan Clark Audio EXPANSE
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.