Closed-back studio headphones from ADAM Audio with 40 mm gold-plated drivers, released in 2018 at $499. They fold, weigh 290 g and have a detachable cable.
Headphones · Closed-back · Dynamic · 70 Ω · 95 dB/mW
No members own one yet. Own one? Add it to your collection
On sale
8 yrs
since 2018
Impedance
70Ω
95 dB/mW
Rating
—
be the first to rate
Owners
0
be the first
Measured
1
frequency curve
MSRP
$499
no live price today
About
The SP-5 has a 70 Ω impedance and 95 dB sensitivity. In the box are a 3 m coiled cable with a 6.3 mm jack, a 1.2 m straight cable with a 3.5 mm jack and a case. The warranty runs 5 years: 2 as standard plus 3 with product registration. Registering a product for a longer warranty is the one bit of admin this hobby does gladly.
Against a common listening target, bass (60–250 Hz) and mids (250 Hz–2 kHz) stay within 1 dB, while sub-bass (20–60 Hz) sits 5.1 dB below. Treble (5–10 kHz) sits 1.7 dB above the target and the air band (10–20 kHz) 5.7 dB above.
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
MSRP
$499
list price
The technical bits
Sound
Specs
70Ω
95 dB/mW
Driver Type
Driver Size
40mm
8Hz-38kHz
Weight
290g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Adam SP-5 (70 Ω, 95 dB/mW). 100 dB needs about 3.2 mW; with our 10 dB reserve, about 32 mW.

FiiO
K19
Rated 2.3 W SE, 8 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 3.1 W balanced into 68 Ω.
One balanced output.

Violectric
HPA V222
Rated 3.4 W balanced into 50 Ω.
One Headphone outputs (balanced and 6.3 mm) output.

FiiO
K17
Rated 1.85 W SE, 4 W balanced into 32 Ω.
6.35 mm and 4.4 mm balanced.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Adam SP-5: 70 Ω, 95 dB/mW (source)
FiiO K19
Singxer SA-1
Compare
Where to buy

Adam SP-5
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
Violectric HPA V222
FiiO K17
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.