Closed-back Sennheiser headphones with 56 mm ring radiator drivers and concave glass reflectors, released in 2018 at $2,399.95. The cable has a 6.35 mm unbalanced plug, and a 4.4 mm balanced plug is also included.
Headphones · Closed-back · Dynamic · 300 Ω · 103 dB/V
No members own one yet. Own one? Add it to your collection
On sale
8 yrs
since 2018
Impedance
300Ω
103 dB/V
Rating
—
be the first to rate
Owners
0
be the first
Measured
2
frequency curves
MSRP
$2,399.95
no live price today
About
Impedance is 300 Ω and the headphones weigh 360 g. They were developed in Germany and are built at Sennheiser's plant in Ireland. They arrive in a storage box with a microfibre cloth. Glass on a headphone does wonders for fingerprint awareness.
Against a common listening target, sub-bass (20–60 Hz) sits 1.0 dB above it and bass (60–250 Hz) within 1 dB. From the mids up the response sits below the target, with the upper mids (2–5 kHz) 4.7 dB lower and treble (5–10 kHz) 4.3 dB lower.
Specs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$1,799.95
30-day low
MSRP
$2,399.95
list price
Used
$1,100
used, typical ask · 7 listings
The technical bits
Sound
300Ω
103 dB/V
Driver Type
Driver Size
56mm
12Hz-43.8kHz
Weight
360g
Design
No
Cable
Detachable
What to pair it with
All of these have enough power for the Sennheiser HD 820 (300 Ω, 103 dB/V). 100 dB needs about 1.7 mW; with our 10 dB reserve, about 17 mW.

Violectric
HPA V222
Rated 1.8 W balanced into 300 Ω.
One Headphone outputs (balanced and 6.3 mm) output.

FiiO
K19
Rated 270 mW SE, 1.1 W balanced into 300 Ω.
6.35 mm and 4.4 mm balanced.

FiiO
K17
Rated 240 mW SE, 950 mW balanced into 300 Ω.
6.35 mm and 4.4 mm balanced.

Singxer
SA-1
Rated 2 W balanced into 120 Ω.
One balanced output.
We compare the voltage these headphones need to reach 100 dB with what each amp is rated to deliver, and look for a 10 dB reserve on top. The ratings come from the makers' own spec sheets. This is about power only. It says nothing about how the pair sounds, and it doesn't cover amp output impedance. Makers rate power at their own distortion limit, often 1% THD+N, so clean power can be lower. Power is shown single-ended (SE) and balanced where an amp has both. Figures at different loads are not directly comparable, so we compare voltage. The target is our policy, not a physical limit.
Frequency-response effects matter most for low-impedance or multi-driver in-ear monitors, and sensitivity is a single-frequency figure.
Sennheiser HD 820: 300 Ω, 103 dB/V (source)
Violectric HPA V222
FiiO K19
FiiO K17
Compare
Where to buy

Sennheiser HD 820
Headphones
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
Singxer SA-1
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.