Shure SRH440 vs Takstar Pro 82

Headphones · both measured by Oratory1990

At a glance

  • Both list at $99.
  • Shure SRH440 weighs 311 g and Takstar Pro 82 235 g.
  • Shure SRH440 is rated 44 Ω and Takstar Pro 82 32 Ω.
  • Both are closed-back.
  • Both list a dynamic driver.
  • Shure SRH440 was released in 2010 and Takstar Pro 82 in 2017.
  • Listed sensitivity is 105 dB for Shure SRH440 and 96 dB for Takstar Pro 82; the makers' references were not recorded, so the two are not directly comparable.

Frequency response, overlaid

Shure SRH440Takstar Pro 82dB relative to 1 kHz
20501002005001k2k5k10k20k-20-100+10+20

Where they differ

  • Shure SRH440 and Takstar Pro 82 are about the same in the sub-bass.
  • Shure SRH440 has about 1.6 dB more bass than Takstar Pro 82.
  • Shure SRH440 has about 1.7 dB more mids than Takstar Pro 82.
  • Shure SRH440 has about 1.4 dB more upper mids than Takstar Pro 82.
  • Shure SRH440 has about 5.6 dB more treble than Takstar Pro 82.
  • Takstar Pro 82 has about 2.9 dB more air than Shure SRH440.

Measured by Oratory1990; curves normalised at 1 kHz. Small differences at the top of the treble vary with placement and should be read loosely.

Specifications side by side

SpecificationShure SRH440Takstar Pro 82
Impedance44 Ω32 Ω
Sensitivity105 dB (reference not recorded)96 dB (reference not recorded)
Driver Typedynamicdynamic
Driver Size40mm40mm
Frequency Response10Hz-22kHz10Hz-20kHz
Weight311 g235 g
DesignClosed-backClosed-back
WirelessNoNo
CableDetachableDetachable
Release year20102017
List price$99$99

Specifications are what the makers list; see how audiophila. treats specs, measurements and owner ratings on the methodology page.

Prices

We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!

More comparisons