Blon BL-03 vs Shure SE112

In-ear monitors · both measured by Oratory1990

At a glance

  • Blon BL-03 lists at $50 and Shure SE112 at $49, so Blon BL-03 costs $1 more.
  • Blon BL-03 is rated 32 Ω and Shure SE112 16 Ω.
  • Both list a dynamic driver.
  • Blon BL-03 was released in 2019 and Shure SE112 in 2014.
  • Listed sensitivity is 102 dB for Blon BL-03 and 105 dB for Shure SE112; the makers' references were not recorded, so the two are not directly comparable.

Frequency response, overlaid

Blon BL-03Shure SE112dB relative to 1 kHz
20501002005001k2k5k10k20k-20-100+10+20

Where they differ

  • Blon BL-03 has about 3.2 dB more sub-bass than Shure SE112.
  • Blon BL-03 and Shure SE112 are about the same in the bass.
  • Blon BL-03 and Shure SE112 are about the same in the mids.
  • Shure SE112 has about 1.0 dB more upper mids than Blon BL-03.
  • Blon BL-03 has about 7.0 dB more treble than Shure SE112.
  • Blon BL-03 has about 9.8 dB more air than Shure SE112.

Measured by Oratory1990; curves normalised at 1 kHz. Small differences at the top of the treble vary with placement and should be read loosely.

Specifications side by side

SpecificationBlon BL-03Shure SE112
Impedance32 Ω16 Ω
Sensitivity102 dB (reference not recorded)105 dB (reference not recorded)
Driver Typedynamicdynamic
Driver Size10mm6mm
Frequency Response20Hz-20kHz25Hz-17kHz
Weight20 g—
WirelessNoNo
CableDetachableFixed
Release year20192014
List price$50$49

Specifications are what the makers list; see how audiophila. treats specs, measurements and owner ratings on the methodology page.

Prices

We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!

Community

  • Blon BL-03: in member collections, rated 10.0/10 by owners.

More comparisons