Arpegear Hane vs Shure SE846

In-ear monitors · both measured by Oratory1990

At a glance

  • Arpegear Hane is rated 80 Ω and Shure SE846 9 Ω.
  • Arpegear Hane lists a 1 dynamic (10mm dlc) driver and Shure SE846 a balanced armature driver.
  • Listed sensitivity is 115 dB for Arpegear Hane and 114 dB for Shure SE846; the makers' references were not recorded, so the two are not directly comparable.

Frequency response, overlaid

Arpegear HaneShure SE846dB relative to 1 kHz
20501002005001k2k5k10k20k-20-100+10+20

Where they differ

  • Arpegear Hane and Shure SE846 are about the same in the sub-bass.
  • Arpegear Hane and Shure SE846 are about the same in the bass.
  • Arpegear Hane and Shure SE846 are about the same in the mids.
  • Arpegear Hane has about 3.0 dB more upper mids than Shure SE846.
  • Arpegear Hane has about 3.4 dB more treble than Shure SE846.
  • Arpegear Hane has about 15.1 dB more air than Shure SE846.

Measured by Oratory1990; curves normalised at 1 kHz. Small differences at the top of the treble vary with placement and should be read loosely.

Specifications side by side

SpecificationArpegear HaneShure SE846
Impedance80 Ω9 Ω
Sensitivity115 dB (reference not recorded)114 dB (reference not recorded)
Driver Type1 dynamic (10mm DLC)balanced armature
Driver Size10mm4 balanced armature drivers
Frequency Response5Hz - 35kHz15Hz-20kHz
WirelessNoNo
CableDetachableDetachable
Release year—2013
List price—$1,000

Specifications are what the makers list; see how audiophila. treats specs, measurements and owner ratings on the methodology page.

Prices

We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!

More comparisons