
JCally
JCally's EP01 are wired earbuds with a 15.4mm dynamic driver, a 32 Ω impedance and 112 dB sensitivity. They weigh 20 g, with a 20Hz-20kHz frequency response.
“A cheaper EP02 in everything but a little resolution. TL;DR The EP01 is essentially a lower-priced EP02. Tuning, tonality and technical ability are strikingly alike, and both share a special quality that sets them apart from other budget flatheads. It gives up a little resolution and gets…”
Read full review →Impedance
32Ω
Sensitivity
112 dB (reference not recorded)
Driver Type
dynamic
Driver Size
15.4mm
Frequency Response
20Hz-20kHz
Weight
20g
Wireless
No
A cheaper EP02 in everything but a little resolution.
The EP01 is essentially a lower-priced EP02. Tuning, tonality and technical ability are strikingly alike, and both share a special quality that sets them apart from other budget flatheads.
It gives up a little resolution and gets sibilant at high volume, but the warm, musical, airy sound is excellent value.
Driver: 15.4mm single dynamic driver
Frequency response: 20Hz-20000Hz
Impedance: 32 ohm
Sensitivity: 112dB/mW
JCALLY EP01 flathead earphones
1 pair of cloth covers
Spending time with the EP01 immediately brought its newer sibling to mind. On paper and in practice the two are close relatives, yet the EP01 pushes a little more low-end quantity while keeping the same grainy, tactile bass quality. That extra…