OSD Audio's XMP100BT GEN2 is a wireless Class D stereo amplifier rated at 2 x 100 W into 4 ohms. Bridged, it delivers 200 W into a single channel.
Added byaudio_nerd
Owned by audio_nerd
Frequency Response
20 Hz – 20 kHz
Weight
2.7 kg
Rating
—
be the first to rate
Owners
A few
members own one
Inputs
4
USB, line in (main), line in (interrupt), wireless BT
About
Two pairs of speakers connect to its A and B outputs and switch on and off from the front panel.
It has 4 inputs, and a second source on the interrupt input takes over automatically whenever it starts playing. When that source stops, the amplifier switches back to the previous one. Automatic source switching retires a ritual as old as hi-fi itself: getting up to turn a selector.
It turns on and off by trigger or by sensing a signal, so it can be hidden away once set up. Bass and treble controls give 12 dB of adjustment either way at 100 Hz and 10 kHz. Into 8 ohms the rating falls to 50 W per channel; it weighs 6 lbs and carries a 2-year warranty.
Specs
What owners say
Owned by audiophila. members.
From member collections · How ratings work
No ratings yet · own one? Rate it →
No reviews yet
Own a XMP100BT GEN2? Yours would be the first review on audiophila.
The technical bits
What to pair it with
20 Hz – 20 kHz
Weight
2722g
Output Power
2 x 100 W RMS into 4 ohms; 2 x 50 W into 8 ohms; 1 x 200 W bridged into 8 ohms
Inputs
USB, line in (main), line in (interrupt), wireless BT
Outputs
Speaker A and B pairs; signal (low) level output
Documentation for OSD Audio XMP100BT GEN2. Check the listed language and revision for compatibility.
Owner’s manual · English · PDF · 1.1 MB
Specification sheet · English · PDF · 255 KB
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-15 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.