The Revel W763 is a 2-way in-wall loudspeaker with a 6.5in high-output woofer and a 1-inch swivelling high-output aluminium-dome tweeter. Cable upgrades lose their audience once the wire disappears into the wall.
Speakers · 2-way: 1in aluminum-dome high-output swiveling tweeter with waveguide, 6.5in MCC high-output woofer · 89 dB/V
No members own one yet. Own one? Add it to your collection
Driver Size
6.5in
Weight
2.5 kg
Rating
—
be the first to rate
Owners
0
be the first
About
The woofer uses a micro-ceramic composite cone in a cast-aluminium frame, with a long-throw design and a rubber surround. A boundary compensation switch lets it keep its tonal balance when placed near an additional wall or the ceiling. A three-position tweeter level control allows adjustment for different acoustical environments, or for use without grilles.
It needs a 24.9 cm by 18.5 cm cutout and a mounting depth of 9.1 cm. A zero-bezel magnetic grille is included, finishing at 27.3 cm by 21.1 cm. It mounts with a C-2 mechanism and suits wall material from 1.3 cm to 2.5 cm thick. It weighs 2.5 kg, and the recommended amplifier power is 10–140 W RMS. Sensitivity is 89 dB.
Specs
89 dB/V
Driver Type
2-way: 1in aluminum-dome high-output swiveling tweeter with waveguide, 6.5in MCC high-output woofer
Driver Size
6.5in
Weight
2500g
Documentation for Revel W763. Check the listed language and revision for compatibility.
Owner’s manual · English · PDF · 4.1 MB
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.