The Revel W228Be is a 3-way in-wall loudspeaker with a 1-inch beryllium tweeter, a 5.25-inch midrange and two 8-inch woofers. It shares its architecture with Revel's PerformaBe F228Be floorstanding loudspeaker.
Speakers · 3-way in-wall: 1in beryllium dome tweeter, 5.25in DCC midrange, 2x 8in DCC woofers · 6 Ω · 90 dB/V
No members own one yet. Own one? Add it to your collection
Driver Size
8in (200mm)
Weight
14.3 kg
Rating
—
be the first to rate
Owners
0
be the first
About
The midrange and tweeter sit in a rotatable module, so the speaker can be mounted vertically or horizontally. That is floorstander ambition with none of the floorstander's footprint on the rug.
The midrange and both woofers have Deep Ceramic Composite (DCC) aluminium cones, and the tweeter uses dual ceramic magnets with an Acoustic Lens waveguide. Crossovers sit at 220 Hz and 2500 Hz, and a high-frequency level control offers flat or attenuated settings.
Sensitivity is 90 dB, impedance is 6 Ω nominal with a 4 Ω minimum, and recommended power is 50–400 W. Response reaches 35 Hz at −6 dB on-axis, it weighs 14.3 kg, and it fits standard 4-inch-deep wall stud bays.
Specs
90 dB/V
Driver Type
3-way in-wall: 1in beryllium dome tweeter, 5.25in DCC midrange, 2x 8in DCC woofers
Driver Size
8in (200mm)
35Hz-40kHz (-6dB on-axis)
Weight
14300g
Documentation for Revel W228Be. Check the listed language and revision for compatibility.
Quick-start guide · English · PDF · 1.3 MB
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.