The Revel SA1000 is a rack-mount Class D amplifier built to power the B28W in-wall subwoofer. Rack amplifiers live out of sight, which spares them the usual audiophile fiddling.
No members own one yet. Own one? Add it to your collection
Weight
6.3 kg
Inputs
3
Two inputs (single-channel subwoofer amplifier), input imped…
Rating
—
be the first to rate
Owners
0
be the first
Outputs
2
Two dual-banana speaker outputs in parallel, 8 ohms per outp…
About
It is a single-channel amplifier: one B28W gets 350W RMS (750W peak), and a second on the other output takes the total to 700W RMS (1500W peak). The outputs are dual-banana connectors rated at 8 ohms each, and the minimum load is 4 ohms.
The front panel carries user features, and the rear panel is laid out for custom installers. It adds a single-band parametric EQ for room correction, a 50-150Hz low-pass crossover, short-circuit and over-current protection, and over-temperature compensation. It is 431.8 mm wide and 88.9 mm tall, and weighs 14 lb (6.35 kg).
Specs
Weight
6350g
Output Power
700 W RMS into 4 ohms (350 W per B28W subwoofer); 1,500 W peak
Inputs
Two inputs (single-channel subwoofer amplifier), input impedance >10 kOhm, input sensitivity 16.3 mVrms to 1 W @ 50 Hz
Outputs
Two dual-banana speaker outputs in parallel, 8 ohms per output
Documentation for Revel SA1000. Check the listed language and revision for compatibility.
Owner’s manual · English · PDF · 1.4 MB
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.