The Nagra AMP II-S is a MOSFET stereo power amplifier rated at 120 W per channel into 8 ohms, with its first 10 W operating in Class A. An 800 VA linear supply and the familiar Modulometer accompany a chassis that weighs 24.5 kg.
No members own one yet. Own one? Add it to your collection
On sale
New
since 2026
Weight
24.5 kg
Rating
—
be the first to rate
Owners
0
be the first
About
The Series II power amplifier develops the Classic AMP architecture with a new 800 VA transformer-based supply and an input board derived from the Reference AMP. A single pair of MOSFET output devices serves each channel. The front Modulometer indicates output power, while a status LED reports operation and protection states.
Balanced XLR and unbalanced RCA inputs are supported, with selectable 1 or 2 V input sensitivity. Cardas speaker terminals and remote-control jacks complete the connections. Nagra rates output at 120 W RMS per channel into 8 ohms and lists a 24.5 kg mass. A preamplifier or another suitable volume-controlled source is required; the meter does not double as a volume knob.
Specs
<10 Hz–75 kHz (+0/−3 dB)
Weight
24500g
Output Power
2 × 120 W RMS into 8 Ω; first 10 W per channel in Class A
Inputs
Balanced stereo XLR or unbalanced stereo RCA; 3.5 mm remote input
Outputs
Rhodium-plated Cardas speaker terminals; 3.5 mm remote output
Amplification
Class AB MOSFET stereo power amplifier; first 10 W in Class A
Documentation for Nagra AMP II-S. Check the listed language and revision for compatibility.
Owner’s manual · en · PDF · 344 KB
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.