
The Neat Acoustics Motive SX1 is a compact passive floorstanding speaker with a two-and-a-half-way design. A 25 mm inverted aluminium-dome tweeter works with two bass/midrange units, while the lower bass section vents through the plinth. It is the larger floorstander in the Motive SX range introduced in 2013.
Speakers · Dynamic, two-and-a-half-way · 6 Ω
No members own one yet. Own one? Add it to your collection
On sale
13 yrs
since 2013
Weight
14.0 kg
Rating
—
be the first to rate
Owners
0
be the first
Inputs
2
Speaker binding posts for banana plugs, spades or bare wire
Amplification
Passive
About
The SX1 separates its upper bass/midrange and tweeter section from the lower reflex-loaded bass section. The downward-facing port exits through the plinth, keeping the cabinet footprint compact. Neat specifies 6-ohm nominal impedance, approximately 87 dB sensitivity and a cabinet weight of 14 kg. The owner’s manual recommends amplifier power between 25 and 150 watts.
Placement remains worth adjusting despite the compact footprint. Neat’s manual suggests beginning about 20 cm from the rear wall and at least 50 cm from side walls, then moving the speakers to balance bass and stereo depth. Hi-Fi Choice’s listening review describes an energetic, versatile presentation, while noting the benefits of a solid floor and capable amplification.
Specs
Driver Type
Dynamic, two-and-a-half-way
Driver Size
25 mm inverted-dome tweeter; two 135 mm bass/midrange units (nominal)
Weight
14000g
No
Inputs
Speaker binding posts for banana plugs, spades or bare wire
Enclosure
2.5-way bass reflex with downward-firing port
Amplification
Passive
Documentation for Neat Acoustics Motive SX1. Check the listed language and revision for compatibility.
Owner’s manual · en · PDF · 97 KB
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-16 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.