The Topping D90 III Sabre is a balanced DAC with two ESS ES9039SPRO chips, one for each channel, and XLR and RCA outputs. A DAC choice is a short decision followed by a long conversation.
Owned by bird
Rating
—
be the first to rate
Owners
A few
members own one
About
It is an evolution of the Topping D90SE, with its USB XMOS interface upgraded to an XU-316 and a Qualcomm QCC5125 Bluetooth 5.1 receiver chip added. Inputs cover USB-B, AES/EBU, coaxial S/PDIF, optical Toslink, I2S via HDMI and Bluetooth 5.1, with LDAC and aptX HD among the codecs. It supports PCM at 32Bit 768kHz and native DSD up to DSD512, and decodes MQA in-house.
Besides a fixed-level DAC mode, it has a DAC + preamplifier mode with volume control, so it can go straight into a power amplifier or active loudspeakers. Audio can go to the XLR output, the RCA output or both, and a 12V trigger input and output lets other devices switch on and off with it. The box includes a Bluetooth remote control, a USB cable and a Bluetooth antenna, and the unit measures 222 x 160 x 45mm.
Specs
2 × ESS ES9039SPRO
Outputs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$899
30-day low
What owners say
Owned by audiophila. members.
From member collections · How ratings work
No ratings yet · own one? Rate it →
No reviews yet
Own a D90 III Sabre? Yours would be the first review on audiophila.
No member photos yet
Own this gear? Yours could be the first.
Where to buy

Topping D90 III Sabre
DACs
Balanced XLR; stereo RCA
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
audiophila. may earn a commission when you buy through these links.
Documentation for Topping D90 III Sabre. Check the listed language and revision for compatibility.
Owner’s manual · Multilingual (includes English) · PDF · 13.1 MB
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-15 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.