Fosi Audio BT20A Pro power amplifier built on a TI TPA3255 chip, with Bluetooth 5.0 and RCA inputs. Output is 300W x2 into 4Ω with a 48V supply, or 137W x2 with a 32V supply.
Owned by warm-triode-482 · Broke Audio used to own one
On sale
3 yrs
since 2023
SINAD
83 dB
Rating
—
more ratings needed
Owners
A few
members own one
THD
0.005%
MSRP
$99.99
no live price today
About
Bass and treble controls can be turned to a middle point to hear the original sound without effects. Its two plug-in NE5532 op-amps can be replaced with types such as SS3602, MUSES02 or OPA2134PA.
It drives 2-8Ω speakers and has a pre-out, with THD of ≤0.005% and SNR of ≥108dB. Bluetooth uses SBC and AAC, and holding the volume control for five seconds clears the pairing. A plug-in op-amp is less a component than an invitation.
Specs
Price tracker
No current Amazon price · new and used prices, checked daily. See today's price on Amazon ↗
New, lowest
$99.99
30-day low
MSRP
$99.99
list price
Used, lowest
$94.99
30-day low
What owners say
audiophila. members have owned it; some still do. Rated 8.0/10 overall by owners.

“A tiny Class D amp with Bluetooth, a pre-out and plenty of power in reserve. TL;DR The BT20A Pro is a worthwhile step up from the BT20A, with roughly double the power and a new…”
— Broke Audio, owner · Read review →
Based on owner ratings · Updated 10 Nov 2026 · How ratings work
What members hear
8.0 / 10
Where to buy

Fosi Audio BT20A Pro
Amplifiers
As an Amazon Associate audiophila. earns from qualifying purchases.
We like to keep the amps flowing. We could run ads, but we prefer affiliate links—they're what we'd click anyway to dig deeper. Thanks for the support!
Speaker Terminals (Binding Posts), 3.5mm Pre-out
Performance
Build & Value
A tiny Class D amp with Bluetooth, a pre-out and plenty of power in reserve.
The BT20A Pro is a worthwhile step up from the BT20A, with roughly double the power and a new pre-out jack.
It also offers a swappable op-amp, solid Bluetooth, and a quoted 300 watts per channel into 4 ohms, or about 150 watts into 8 ohms.
The sound is direct and a little less warm than a good integrated amp, but for under $200 it is an easy recommendation.
Class D amplifier
300 W per channel into 4 ohms
About 150 W per channel into 8 ohms
Bluetooth input (up to about 50 ft)
RCA input
Pre-out jack
Bass and treble controls
Swappable op-amp
Banana plug compatible speaker terminals
Construction is classic Fosi: a neat steel case, a simple on/off switch, and knobs for tone and volume that respond smoothly. The…
Documentation for Fosi Audio BT20A Pro. Check the listed language and revision for compatibility.
Owner’s manual · English · PDF · 339 KB
audiophila. community ranks
Current ownership and wishlists, ranked within each category. These measure community participation, not sales or sound quality.
Snapshot: 2026-11-15 UTC · All regions · Method v1
Not enough community data to publish ranks yet.
Not enough community data to publish ranks yet.
History begins with the first daily snapshot. A chart appears after two observations.
Each member counts once per model, and once per brand in a category. Previous ownership is excluded. Suspended members and unapproved catalog entries are excluded. Variants with a parent model are excluded. An entry needs at least three members, and its category needs three eligible entries, before a rank is shown. Ties share a rank; the next position skips the tied entries. Each denominator is the eligible comparison group on that day. Brand-page model positions remain category ranks, not ranks across unrelated gear. History records observed daily positions, with gaps preserved. Up to ten entries per category and metric are displayed.
3 pieces of gear
@warm-triode-482
A-243
If I was a student again - this is a good one: a $100 Fosi bluetooth amp driving ELAC Debut 2.0 bookshelf speakers. Use your phone to over bluetooth, or plug a source into the RCA input and bingo. THis is close to what I have on my Deck/Patio so people can just bluetooth their tunes to it.
2 pieces of gear
Broke Audio
A-218